[Top] [Prev] [Next] [Contents] [Index]

Index

A B C D E F G H I J K L M

N O P Q R S T U V W X Z

Symbols

: ! command (Boot Monitor) 11-10
: ? command (Boot Monitor) 11-10

Numerics

: 3270 terminal emulation, configuration parameters for 9-42

A

Acceleration Ratio (Change User Preferences) 9-51

: configuration parameters for 9-9 to 9-13
: font server 7-22
: local clients, disabling 6-34
: parallel port 15-10
: serial ports 15-10
: SNMP 16-3 to 16-7
: terminal configuration data 6-30 to 6-34
: XDM (X Display Manager) 8-15 to 8-16
: see also passwords

Activate Alpha Buffer for RGBA Visuals (Change User Preferences) 9-49

Add Domain to Unit Name as Filename (Change Setup Parameters) 9-19

Add Timestamps (Change Setup Parameters) 9-20

Additional Escape Chars (Change Setup Parameters) 9-41

address discovery

addresses in NVRAM 3-11

BOOTP/DHCP 3-3 to 3-10

broadcast address 3-12

configuring in Boot Monitor Setup 11-15

protocols

: order of use 3-2
: overview 3-1 to 3-2

RARP 3-10

subnet mask 3-13

address resolution 5-5

addresses, see Ethernet; IP (Internet Protocol); Token-Ring

Administrative Contact (Change Setup Parameters) 9-38

Administrative Status (Change Setup Parameters) 9-38

Allow Alpha Test (Change User Preferences) 9-48

Allow Blending (Change User Preferences) 9-48

Allow Depth Test (Change User Preferences) 9-48

Allow Dithering (Change User Preferences) 9-48

Allow Exposures After Screen Saver (Change User Preferences) 9-53

Allow Logical Operations (Change User Preferences) 9-49

Allow MOP Reset (Change Setup Parameters) 9-31

Allow Polygon Stipple (Change User Preferences) 9-49

Allow Scissor Test (Change User Preferences) 9-48

Allow SNMP Reset (Change Setup Parameters) 9-11

Allow Stencil Test (Change User Preferences) 9-48

Allow XRemote TCP Connection (Change Setup Parameters) 9-41

AppletViewer Command (Change Setup Parameters) 9-27

apply command (Configuration language) 6-34 to 6-37

Arc Cache Maximum Size (Change Setup Parameters) 9-40

arc caching, memory used for 9-40

ARP (Address Resolution Protocol)

: ARP cache 5-5 to 5-6
: configuration parameters for 9-13
: proxy ARP 5-29

ARP Cache (Change Setup Parameters) 9-13

Audio Enabled (Change Setup Parameters) 9-40

Authorize XRemote Clients (Change Setup Parameters) 9-41

Auto Save (Change Setup Parameters) 9-8

Auto Save File (Change Setup Parameters) 9-20

Auto Save File Name (Change Setup Parameters) 9-20

Auto Save NVRAM (Change Setup Menus) 9-19

Auto Saved Info (Change Setup Parameters) 9-20

Automatic Lock Screen After (Change User Preferences) 9-46

Automatic Logout After (Change User Preferences) 9-46

Automatic Logout Cancel Delay (Change User Preferences) 9-46

Automatically load images (Change Setup Parameters) 9-16

Autorepeat Begin After (Change User Preferences) 9-47

Autorepeat Rate (Change User Preferences) 9-48

: configuring 6-34 to 6-37
: disabling 6-35
: extent of data saved 6-37
: protocols for 6-35
: saving parameters to a file 6-35 to 6-36
: saving parameters to NVRAM 6-35

B

backing store, configuring 9-54

Backup File Server Address (Change Quick Setup) 9-4

Backup File Service Protocol (Change Quick Setup) 9-3

backward compatibility, parameters for 9-45

bd command (Boot Monitor) 11-7

Be Compatible With Old DECwindows Images (Change User Preferences) 9-45

Be Compatible With Old DECwindows Keyboards (Change User Preferences) 9-45

Be Compatible With Old DECwindows Vendor String (Change User Preferences) 9-45

Begin Sending Keepalives after (Change Setup Parameters) 9-30

Bell Base Volume (Change User Preferences) 9-45

Bell Duration (Change User Preferences) 9-45

Bell Pitch (Change User Preferences) 9-45

bell, configuration parameters for 9-45

Bitmap Background Color (Change User Preferences) 9-53

Bitmap File (Change User Preferences) 9-52

Bitmap Foreground Color (Change User Preferences) 9-53

bl command (Boot Monitor) 11-7

Black Pixel (Change Setup Parameters) 9-41

bn command (Boot Monitor) 11-7

Boot automatically at power-up (Change Setup Parameters) 9-13

Boot From (Change Quick Setup) 9-3

: backup hosts 4-16
: first host to try 4-15

Boot Host IP Address (Change Quick Setup) 9-3

accessing 4-18, 11-6

booting from 4-17

commands 11-7 to 11-10

displaying 11-2

functions of 11-2 to 11-5

NVRAM utility

: commands 11-20
: sample sessions 11-21
: starting 11-20

Setup

: Boot window 11-16
: exiting 11-17
: keyboard type, setting 11-13
: keymapper for 11-18
: monitor dpi and resolution 11-13
: navigating in 11-13
: Network window 11-14 to 11-16
: rebooting from 11-17
: saving changes 11-17
: starting 11-12
: submenus 11-12

updating (Explora 400/450 and 700) 11-11

version, displaying 16-8

versions 11-1

Boot Monitor Inverse Video (Change Setup Parameters) 9-14

boot-automatically 9-13, 11-7

boot-custom-file 9-14

boot-default-server-when-prom-booting 9-14

boot-desired-source 4-8, 9-3, 9-14

absolute pathname requests 4-2, 4-6

automatic boot, disabling 4-4

boot hosts 4-15, 4-16

booting sequence, default 2-1, 4-8

BOOTP/DHCP 3-3 to 3-10

broadcast requests, disabling 4-4

color database file, loading 2-5

configuration files, loading 6-21 to 6-27

configuration parameters for 9-3, 9-13 to 9-15

configuring in Boot Monitor Setup 11-16

default actions 2-1 to 2-5

from PCMCIA

: manual boot 4-18
: order of 4-8

manual

: from PCMCIA 4-18
: overview 4-17
: using MOP 11-7
: using NFS 4-18, 11-7
: using TFTP 4-18, 11-8

modules, load policy 4-10

MOP requests

: default 4-3
: disabling 4-5
: manual boot 11-7
: order of 4-8

NFS requests

: default 4-3
: disabling 4-5
: location of X servers 4-13
: manual boot 4-18
: order of 4-8

persistent, enabling 4-7

protocols

: backup choices 4-9
: first choice 4-9
: order of 4-2, 4-8 to 4-10

RARP 3-10

relative pathname requests 4-2, 4-6

remote reset 16-10 to 16-13

: using ncdreset 16-11 to 16-12
: using unit-administrative-status 16-12

reverse name request 3-15, 5-12

TFTP requests

: default 4-2
: disabling 4-5
: location of X servers 4-12
: manual boot 4-18
: order of 4-8

through a gateway 3-8 to 3-10, 11-7, 11-8

X server loading 4-1 to 4-15

see also address discovery; X server

boot-monitor-inverse-video 9-14

boot-mop 4-5, 9-15

boot-mop-with-file-name 9-15

boot-nfs-directory 9-15

: /etc/bootptab file 3-5 to 3-10
: diagnostic messages 18-38
: enabling 3-4
: entry, example 3-7, 3-9
: option tags supported 3-6

: backup boot host, specifying 4-16
: enabling 3-4

boot-persistent-loading 9-14

boot-previous-server 9-14

boot-previous-source 9-14

boot-second-source 9-14

boot-send-broadcast-icmp-for-subnet-mask 3-14, 9-15

boot-tcpip-broadcast-boot-request 4-4, 9-15

boot-tcpip-desired-server 9-3, 9-14

boot-tcpip-product-name-and-memory-size-file 4-6, 9-15

boot-tcpip-product-name-and-memory-size-with-path-file 4-6, 9-15

boot-tcpip-product-name-file 4-6, 9-15

boot-tcpip-product-name-with-path-file 4-6, 9-15

boot-tcpip-second-server 9-14

boot-tcpip-third-server 9-14

boot-tcpip-unit-address-file 4-6, 9-15

boot-tcpip-unit-address-with-path-file 4-6, 9-15

boot-test-ram 9-13

boot-tftp-directory 9-15

boot-third-source 9-14

broadcast address 3-12

Broadcast Address (Change Setup Parameters) 9-25

Broadcast IP Address (Change Quick Setup) 9-5

Browser Module (Change Setup Parameters) 9-16

Browser Printer Table (Change Setup Parameters) 9-17

bt command (Boot Monitor) 11-8

Buffer Size (Change Setup Parameters) 9-20

Button Arrangement (Change User Preferences) 9-51

Button Press Threshold (Change User Preferences) 9-51

Button Release Threshold (Change User Preferences) 9-51

C

Cache Class File (Change Setup Parameters) 9-27

Cache Size Limit (Change Setup Parameters) 9-16

CALIBLIGHTPEN messages 18-16

Calibrate Light Pen (Change Setup Parameters) 9-25

Calibrate Touch Screen (Change Setup Parameters) 9-25

CALIBTOUCH messages 18-17

Change Quick Setup, see Setup menus (Console)

Change Screen Saver After (Change User Preferences) 9-53

Change Setup Parameters, see Setup menus (Console)

Change User Preferences, see Setup menus (Console)

Circuit Flush Timeout (Change Setup Parameters) 9-27

Clear Messages command (Console) 18-5

: font requests 7-4, 7-6
: old X clients, error checks 9-45
: X resources, loading 8-7
: see also local clients

: color text in Terminal Emulator 12-31
: colormap, default 9-41
: database file for 2-5, 5-15, 9-40
: screen background 9-52, 9-53
: with WinCenter 9-40

Color Clipping Method (Change User Preferences) 9-50

Command Menu (Change Setup Parameters) 9-18

Complete Entry Timeout (minutes) (Change Setup Parameters) 9-13

Config Access Control List (Change Setup Parameters) 9-10

Config File (Change Quick Setup) 9-4

config file (font server) 7-23

Config Read-Only Password (Change Setup Parameters) 9-9

Config Read-Write Password (Change Setup Parameters) 9-9

config-access-control-enabled 6-30, 6-31, 9-10, 9-19

config-access-control-list 6-31, 9-10

config-add-domain-to-unit-name-as-filename 6-23, 9-20

config-auto-saved-info 6-37, 9-20

config-auto-save-file 6-36, 9-20

config-auto-save-file-name 6-36, 9-20

config-auto-save-nvram 6-35, 9-19

config-custom-file 6-23, 9-18

CONFIGD messages 18-18

config-default-file 9-2, 9-4, 9-7, 9-8, 9-19, 9-44

config-enforce-passwords-locally 9-9

config-generic-file 6-24, 9-19

config-load-initial-file 6-27, 9-18

config-ncdnet-object-name 9-19

config-persistent-loading 6-22, 9-18

config-pref-enforce-passwords-locally 9-10

config-pref-ncdnet-object-name 9-20

config-pref-read-only-password 9-10

config-pref-read-write-password 9-10

config-pref-tcp-port 6-29, 9-20

config-pref-telnet-port 6-29, 9-20

config-read-only-password 9-7, 9-9, 9-43

config-read-write-password 9-7, 9-9, 9-43

config-tcp-port 6-28, 9-19

config-telnet-port 6-27, 6-28, 9-19

config-unit-ethernet-address-file 6-23, 9-19

config-unit-ip-address-file 6-24, 9-19

config-unit-name-file 6-23, 9-19

config-unit-ncdnet-address-file 6-24, 9-19

config-unix-directory 6-26, 9-4, 9-18

Configuration daemon

: configuration parameters for 9-19
: defined 6-2
: diagnostic messages 18-18
: ports for accessing 6-28
: starting from Terminal Emulator 12-2

configuration file directory 6-26

configuring terminals, see terminal configuration; remote configuration; remote configuration files; Setup menus (Console); Setup (Boot Monitor); NVRAM utility

config-use-decimal-ip-address-notation-as-filename 6-24, 9-19

config-vms-directory 9-4, 9-18

CONFUI messages 18-31

Connect Timeout (Change Setup Parameters) 9-27, 9-31, 9-36

: configuration parameters for 9-10, 9-46
: diagnostic messages 18-34
: disabling 6-34
: key sequence for displaying 9-46

Console Display Password (Change Setup Parameters) 9-10

Console Key Sequence (Change User Preferences) 9-46

CONSOLE messages 18-34

copyright statement i

: Terminal Host Chooser, automatic display of hosts 12-3
: see also Terminal Emulator

Current Font Path (Change User Preferences) 9-47

Current Pointing Device (Change User Preferences) 9-51

Custom File (Change Setup Parameters)

: remote configuration file 9-18
: X server file 9-14

D

da command (Boot Monitor) 11-8

Data Compression Mode (Change Setup Parameters) 9-41

: configuration parameters for 9-31 to 9-32
: statistics 10-9 to 10-11

: configuration parameters for 9-30, 9-45

Default Colormap (Change Setup Parameters) 9-41

Default File (Change Setup Parameters) 9-19

Default Font Path at Reset (Change Quick Setup) 9-4

Default for Enable X Access Control (Change Setup Parameters) 9-9

Default home page (Change Setup Parameters) 9-16

Default Hosts (Change Setup Parameters)

: for 3270 Host Chooser 9-42
: for Login Chooser 9-29
: for login through the Terminal Emulator 9-39

Default Linger Time (Change Setup Parameters) 9-36

Default Packet Time-to-Live (Change Setup Parameters) 9-26

Default Router (Change Setup Parameters) 9-31

Default Server when PROM Booting (Change Setup Parameters) 9-14

Default Visual (Change Setup Parameters) 9-41

Default VMS File Name Extension (Change Setup Parameters) 9-23

Delay LAT Display after Boot (Change Setup Parameters) 9-39

Delay When Blanking Screen (Change User Preferences) 9-46

DESKTOP messages 18-37

: messages 18-38
: see also BOOTP/DHCP

diag-access-control-enabled 9-11

diag-access-control-list 9-11

diag-add-timestamps 9-20

diag-buffer-size 9-20, 18-7

diag-log-file 9-20, 18-6

diag-ncdnet-object-name 9-21

Diagnostic Access Control List (Change Setup Parameters) 9-11

Diagnostic daemon

: configuration parameters for 9-20
: messages about 18-39
: starting from Terminal Emulator 12-2
: TELNET connection to 18-5

diagnostic messages, see messages

diag-tcp-port 9-20

diag-telnet-port 9-20

diag-timestamp-frequency 9-20, 18-6

Disabled Commands (Change Setup Parameters) 9-18

Disabled Networks (Change Setup Parameters) 9-29

Disabled X Extensions (Change Setup Parameters) 9-40

display background, configuration parameters for 9-52

DISPLAY environment variable

: set by XDM 8-4

Dither Flat Shaded Surface (Change User Preferences) 9-50

Dither Interpolated Surface (Change User Preferences) 9-50

dm command (Boot Monitor) 11-8

DNS (Domain Name System)

: configuration parameters for 9-37
: domain suffix, default 5-9
: enabling 5-7
: name server hosts, specifying 5-8
: name space, widening searches of 9-37
: reverse name request 3-15, 5-12
: selecting 5-8

DNS Default Domain (Change Setup Parameters) 9-37

DNS Domain Search (Change Setup Parameters) 9-37

: conventions 1-5
: copyright statement i
: how to comment on 1-6
: intended audience 1-1
: license server 1-4
: NCDware manuals 1-4
: part number i
: revision number i
: trademarks i
: WinCenter 1-5

Domain Channel (Change Setup Parameters) 9-33

DOS messages 18-39

DPS (Display PostScript)

cache, freeing 13-12

CIE-dict19c.dat file 13-7

configuration parameter for 9-21

file access protocols 13-2

fonts

: adding 13-11
: client access, configuring 13-11
: directories 13-9
: included in NCDware distribution 13-8

InitProc.dat file 13-7

licensing 13-2

PSres.upr file 13-3 to 13-6

resource path 13-10

Solaris systems, running applications on 13-13

support files 13-3 to 13-7, 13-10

terminals supported 13-1

troubleshooting 13-12

VM_3_2.SNF file 13-7

dps-resource-path 9-21, 13-10

dr command (Boot Monitor) 11-8

ds command (Boot Monitor) 11-8

DTR messages 18-41

E

EHLLAPI A Default tcp Port (Change Setup Parameters) 9-42

Enable 24-bit RGBA (Change User Preferences) 9-49

Enable 3270 Terminal Emulation (Change Setup Parameters) 9-42

Enable 8-bit Color-Index (Change User Preferences) 9-49

Enable 8-bit RGBA (Change User Preferences) 9-49

Enable Bell (Change User Preferences) 9-45

Enable Benchmark Optimizations (Change User Preferences) 9-54

Enable Config Access Control (Change Setup Parameters) 9-10

Enable Diagnostic Access Control (Change Setup Parameters) 9-11

Enable Execution Host Access Control (Change Setup Parameters) 9-12

Enable Execution User Access Control (Change Setup Parameters) 9-12

Enable File Manager Access Control List (Change Setup Parameters) 9-12

Enable Floppy Filesystem (Change Setup Parameters) 9-23

Enable Graphics Optimizations (Change User Preferences) 9-54

Enable Keyboard Autorepeat (Change User Preferences) 9-47

Enable NFS Server (Change Setup Parameters) 9-23

Enable Screen Saver (Change User Preferences) 9-53

Enable Serial and Parallel Access Control (Change Setup Parameters) 9-13

Enable SNMP Read-Only Access Control (Change Setup Parameters) 9-11

Enable SNMP Read-Write Access Control (Change Setup Parameters) 9-11

Enable VESA Monitor Power Management 9-52

Enable X Access Control (Change Setup Parameters) 9-9

enet-interfaces-table 10-2

Enforce Config Passwords Locally (Change Setup Parameters) 9-9

Enforce Console Password Locally (Change Setup Parameters) 9-10

Enforce User Preferences Passwords Locally (Change Setup Parameters) 9-10

Environment Variables (Change Setup Parameters), for the NCD Mosaic Browser 9-16

Environment Variables (Change User Preferences), for local clients 9-47

Equivalent IP Addresses (Change Setup Parameters) 9-26

/etc/bootptab file 3-5 to 3-10

/etc/bootptab.cfg file 3-3

/etc/ethers file 3-11

/etc/services file 3-4

address

: displaying 3-11
: on terminal base 3-11
: restoring 11-21 to 11-22

interfaces

: configuration parameters for 9-32
: statistics 10-13

ex command (Boot Monitor) 11-8

exec-access-control-enabled 9-12

exec-access-control-list 9-12

exec-command-menu 9-18

EXECD messages 18-41

exec-disabled-commands 6-34, 9-18

exec-startup-commands 9-6, 9-18

exec-user-access-control 9-12

Execution Access Control List (Change Setup Parameters) 9-12

Export Directory List (Change Setup Parameters) 9-23

Extended Diagnostics (Change Setup Parameters) 9-22

Extended File Diagnostics (Change Quick Setup) 9-4

Extended Routing Diagnostics (Change Setup Parameters) 9-26

F

Failed Server Ignore Timeout (Change Setup Parameters) 9-22

Fast MPEG decoder (Change Setup Parameters) 9-39

Fast Perspective Rendering (Change User Preferences) 9-49

File Manager Access Control List (Change Setup Parameters) 9-12

File Server Address (Change Quick Setup) 9-3

configuration parameters for 9-3, 9-22

diagnostic messages 18-88

diagnostic messages, extended 5-24

file server hosts 5-13 to 5-20

: boot host 5-13
: in file service table 5-15
: initial file servers 5-13

file service table 5-15 to 5-20

locations of files, default 5-15

matching filenames to file service table entries 5-18 to 5-20

NFS

: configuring 5-22 to 5-23
: statistics 10-13

TFTP

: configuring 5-20 to 5-22
: statistics 10-25

timeouts, configuring 5-24

File Service Protocol (Change Quick Setup) 9-3

File Service Table (Change Setup Parameters) 9-22

FILED messages 18-45

file-default-vms-file-name-extension 9-23

file-enable-floppy-filesystem 9-23

file-enable-nfs-server 9-23

file-export-directory-list 9-23

file-extended-diagnostics 5-24, 9-4, 9-22, 13-12, 18-7

file-failed-server-ignore-timeout 5-24, 9-22

file-initial-protocol-1 9-3, 9-22

file-initial-protocol-2 9-3, 9-22

file-initial-server-1 9-3, 9-22

file-initial-server-2 9-4, 9-22

file-manager-access-control-enabled 9-12

file-manager-access-control-list 9-12

file-manager-ncdnet-object-name 9-21

file-manager-password 9-12

file-manager-tcp-port 9-21

file-manager-telnet-port 9-21

file-name-type-for-initial-tftp-servers 9-4, 9-22

file-nfs-access-control list 9-12

file-nfs-access-control-default 9-12

file-nfs-gid 5-23

file-nfs-uid 5-23

file-nfs-unmount-timeout 5-23, 9-22

file-service-table 5-16, 9-22

file-try-all-matches-on-open 5-19, 9-22

floppy drive, diagnostic messages 18-39

FONT messages 18-49

Font Name Table (Change Setup Parameters) 9-24

access control for 7-22

architecture (illustration) 7-20

backup font servers 7-21

bitmap font format 7-21

Bitstream Speedo outline fonts 7-21

compressed font files 7-21

configuration file, example 7-23

configuration parameters for 9-24

defined 7-19 to 7-20

diagnostic messages

: explanations of 18-49

displaying fonts 7-27

error logging 7-23

font formats 7-20 to 7-21

host load, configuring 7-22

IBM Type 1 (Adobe) outline fonts 7-21

installation 7-21

listing fonts 7-27

ncdfsinfo(1) 7-26

ncdfslsfonts 7-27

outline fonts 7-20, 7-21

point size, default 7-23

resolution, default 7-23

SNF fonts 7-21

timeouts, configuring 7-25 to 7-26

font-cache-hits 10-3

font-cache-size 10-3

font-cache-used 10-3

font-extended-diagnostics 18-7

font-number-of-fonts-in-cache 10-3

font-object-count 10-3

font-objects-currently-in-use 10-3

access sequence 7-2

available fonts, listing 7-18

BDF format

: converting to PCF 7-10
: defined 7-7

built-in 7-11

cache 7-14

characters in a font, displaying 7-18

client font requests 7-4, 7-6

configuration parameters for 9-4, 9-23, 9-47

default font 7-13

diagnostic messages

: displaying 7-17
: explanations of 18-49
: logging 7-17

directories for 7-8

downloading, protocols for 7-6

DPS fonts 13-8, 13-11

DWF format 7-7

files 7-8 to 7-10

font information, displaying 7-17 to 7-19

font names 7-2 to 7-5

font path

: aliases for, creating 7-16
: current 7-11 to 7-13
: defined 7-6
: displaying 7-17
: xset(1), setting current font path 7-13

fonts.alias file

: defined 7-9
: name, changing 7-15

fonts.dir file

: creating 7-10
: defined 7-9
: name, changing 7-15

formats 7-7

initial file server hosts 5-13

NCDware distribution, fonts included 7-8

outline fonts, see font server

PCF fonts 7-7

PEX fonts 14-2

samples of a font, displaying 7-18

SNF format 7-7

statistics 10-3

XLFD (X Logical Font Description) 7-2, 7-18

see also font server

fonts.alias file 7-9 to 7-10, 7-15

fonts.dir file 7-9, 7-10, 7-15

font-total-fonts-loaded 10-3

FTP Proxy Overrides (Change Setup Parameters) 9-17

FTP Proxy Host (Change Setup Parameters) 9-17

FTP Proxy Host Port (Change Setup Parameters) 9-17

Function Key Style (Change User Preferences) 9-47

G

: booting through 3-8, 11-7, 11-8
: configuration parameters for 9-25
: default gateways 5-25
: router discovery 5-30
: see also routing

Gateway IP Address (Change Quick Setup) 9-5

get-protect command (Configuration language) 6-32, 6-33

GET-PROTECTED parameter value 6-5

Gopher Proxy Host (Change Setup Parameters) 9-17

Gopher Proxy Host Port (Change Setup Parameters) 9-17

Gopher Proxy Overrides (Change Setup Parameters) 9-17

graphics optimizations, configuration parameters for 9-54

H

Hello Timeout (Change Setup Parameters) 9-31

name service 5-7 to 5-10

terminal

: configuration parameters for 9-38
: reverse name request 3-15, 5-12

HTTP Proxy Host (Change Setup Parameters) 9-16

HTTP Proxy Host Port (Change Setup Parameters) 9-16

HTTP Proxy Overrides (Change Setup Parameters) 9-17

I

ICMP (Internet Control Message Protocol)

: configuration parameters for 9-26
: router discovery 5-30
: statistics 10-3 to 10-5
: subnet mask discovery 3-14

icmp-address-mask-replies-received 10-4

icmp-address-mask-replies-transmitted 10-5

icmp-address-mask-requests-received 10-4

icmp-address-mask-requests-transmitted 10-5

icmp-destination-unreachables-received 10-3

icmp-destination-unreachables-transmitted 10-5

icmp-echo-replies-received 10-4

icmp-echo-replies-transmitted 10-5

icmp-echo-requests-received 10-4

icmp-echo-requests-transmitted 10-5

icmp-packets-received 10-3

icmp-packets-received-with-errors 10-3

icmp-packets-transmitted 10-4

icmp-packets-unable-to-be-transmitted 10-4

icmp-parameter-problems-received 10-4

icmp-parameter-problems-transmitted 10-5

icmp-redirects-received 10-4

icmp-redirects-transmitted 10-5

icmp-source-quenches-received 10-4

icmp-source-quenches-transmitted 10-5

icmp-time-exceededs-received 10-4

icmp-time-exceededs-transmitted 10-5

icmp-timestamp-replies-received 10-4

icmp-timestamp-replies-transmitted 10-5

icmp-timestamp-requests-transmitted 10-5

icmp-timestamps-requests-received 10-4

IEN 116 name service

: configuration parameters for 9-37
: enabling 5-7
: name server hosts, specifying 5-8
: selecting 5-8

Ignore Case on TCP/IP Name Cache Lookups (Change Setup Parameters) 9-37

Incomplete Entry Timeout (minutes) (Change Setup Parameters) 9-13

Initial Default Gateway 1 (Change Setup Parameters) 9-25

Initial Default Gateway 2 (Change Setup Parameters) 9-26

Initial File Server 1 (Change Setup Parameters) 9-22

Initial File Server 2 (Change Setup Parameters) 9-22

initial file servers, see file service

Initial Protocol 1 (Change Setup Parameters) 9-22

Initial Protocol 2 (Change Setup Parameters) 9-22

Input Extension Device (Change Setup Parameters) 9-25

IP (Internet Protocol)

addresses

: configuration parameters for 9-25
: hexadecimal, converting to 4-15
: multi-homed hosts 3-15
: see also address discovery

routing table 5-26 to 5-29

statistics 10-6 to 10-8

IP Address (Change Setup Parameters) 9-25

IP Address At Next Boot (Change Setup Parameters) 9-25

ip-address 9-25

ip-address-at-next-boot 9-5, 9-25

ip-broadcast-address 3-12, 3-13, 9-5, 9-25

ip-default-packet-time-to-live 9-26

ip-equivalent-address 3-15

ip-equivalent-addresses 9-26

ip-extended-routing-diagnostics 9-26, 18-7, 18-56

ip-forwarding-type 10-6

ip-initial-default-gateway-1 5-25, 9-5, 9-25

ip-initial-default-gateway-2 5-25, 9-26

ip-packet-fragmentations-completed 10-8

ip-packet-fragmentations-not-completed 10-8

ip-packet-fragments-created 10-8

ip-packet-reassemblies-completed 10-8

ip-packet-reassemblies-not-completed 10-8

ip-packet-reassemblies-required 10-8

ip-packet-reassembly-timeout 10-7

ip-packets-forwarded 10-6

ip-packets-received 10-6

ip-packets-received-and-delivered 10-7

ip-packets-received-and-discarded 10-7

ip-packets-received-with-errors-in-ip-header 10-6

ip-packets-received-with-incorrect-address 10-6

ip-packets-received-with-unknown-protocols 10-6

ip-packet-transmission-requests 10-7

ip-packet-transmission-requests-discarded 10-7

ip-packet-transmission-requests-without-routes 10-7

ip-respond-to-broadcast-icmp 9-26

IPROUTE messages 18-56

ip-routing-table 5-27

ip-routing-table 5-27, 9-26

ip-subnet-mask 9-5, 9-25, 10-8

ip-use-address-discovery 9-26

ip-use-proxy-arp 5-30, 9-26

ip-use-router-discovery 5-30, 9-26

ip-use-router-solicit 5-30, 9-26

J

: configuration parameters for 9-27
: diagnostic messages 18-37, 18-58

Java applets (Change Setup Parameters) 9-16

Java Directory (Change Setup Parameters) 9-27

JAVA messages 18-58

java-appletviewer-command 9-27

java-cache-class-file 9-27

java-directory 9-27

Jscript/Javascript routines (Change Setup Parameters) 9-16

K

KBM messages 18-59

Keepalive Idle Time (Change Setup Parameters) 9-36

Keepalive Interval (Change Setup Parameters) 9-36

Keepalive Timeout (Change Setup Parameters) 9-27, 9-31

Keyboard Description File (Change Setup Parameters) 9-24

Keyboard Type (Change Setup Parameters) 9-24

compose sequences for Terminal Emulator 12-45 to 12-51

configuration parameters for 9-24, 9-47

dead-key processing 17-61 to 17-63

downloadable keyboard description files

: creating 17-55 to 17-63
: diagnostic messages 18-59

escape sequences for Terminal Emulator 12-35 to 12-44

keyboard controller version, displaying 16-8

keysym file 5-15, 9-40

keysyms

: file 5-15, 9-40
: foreign language keyboards 17-1

LEDs, configuring 9-48

N-101, details 17-14 to 17-21

N-107, details 17-37 to 17-44

N-108, details 17-22 to 17-36

N-108LK function keys, programming 12-29 to 12-31

N-123, details 17-45 to 17-54

N-97, details 17-5 to 17-13

type, setting

: in Boot Monitor Setup 11-13
: xserver-keyboard-type parameter 17-2

VT220-compatible, details 17-22 to 17-36

Windows 95-compatible 17-14

Keyclick Volume (Change User Preferences) 9-48

: messages 18-68

KEYMAPPER messages 18-68

keymapper, Boot Monitor 11-18

Keysym File (Change Setup Parameters) 9-40

: file 2-5, 5-15
: foreign-language keyboards 17-1

keysyms file 9-40

km command (Boot Monitor) 11-8, 11-18

ks command (Boot Monitor) 11-8

L

: configuration parameters for 9-27
: passwords 9-12
: services in Terminal Host Chooser 12-3

lat-circuit-flush-timeout 9-27

lat-connect-timeout 9-27

lat-keepalive-timeout 9-27

lat-retransmission-limit 9-28

lat-retransmission-timeout 9-28

lat-service-directory-max-size 9-27

lat-service-groups 9-27

launcher, diagnostic messages 18-134

Led 1, Led 2, Led 3, Led 4 (Change User Preferences) 9-48

License Agent Port Number (Change Setup Parameters) 9-28

License Agents (Change Setup Parameters) 9-28

License Key (Change Quick Setup) 9-5

License Key (Change Setup Parameters) 9-28

LICENSE messages 18-68

Licensed Features (Change Quick Setup) 9-5

Licensed Features (Change Setup Parameters) 9-28

: configuration parameters for 9-5, 9-28
: diagnostic messages 18-68
: error log file 18-68
: license server, supplemental documentation for 1-4

: configuration parameters for 9-25
: diagnostic messages 18-16

Light Pen Blue Flood (Change Setup Parameters) 9-25

Load Initial File (Change Setup Parameters) 9-18

Load Policy (Change Setup Parameters) 9-29

Loadable Modules Directory (Change Quick Setup) 9-4

Loadable Modules Directory (Change Setup Parameters) 9-29

LOADB messages 18-75

loader, diagnostic messages 18-104

: configuration parameters for 9-18
: diagnostic messages 18-41
: environment variables, setting 9-47

Local Dead Key Support (Change Setup Parameters) 9-25

Local File Manager

: configuration parameters for 9-21
: diagnostic messages 18-45
: starting from Terminal Emulator 12-2
: see also local file system

local file system

: booting from 11-7
: configuration parameters for 9-22
: diagnostic messages 18-78
: messages 18-45
: see also Local File Manager

Local Name Cache (Change Setup Parameters) 9-32, 9-37

LOCALDEV messages 18-78

Lock Screen Default Password (Change User Preferences) 9-46

lock screen, configuration parameters for 9-46

Log File (Change Setup Parameters) 9-20

Login (Console)

: diagnostic messages 18-79

LOGIN messages 18-79

Login Name (Change Setup Parameters) 9-30

Login Password (Change Setup Parameters) 9-30

login, see XDM (X Display Manager)

login-default-hosts 9-29

login-disabled-networks 9-29

login-dwlogin-name 9-30

login-dwlogin-password 9-30

login-ncddm-enabled 9-30

login-ncddm-tcp-port 9-30

login-restrict-host-choices 9-29

login-window-delay-time 8-17, 9-29

login-xdm-action-on-disconnect 8-17, 9-30

login-xdm-authentication-key 9-9

login-xdm-broadcasts 9-30

login-xdm-broadcast-wait-time 9-30

login-xdm-display-class 9-29

login-xdm-indirects 9-30

login-xdm-keepalives-begin-time 8-18, 9-30

login-xdm-keepalives-wait-time 8-19, 9-30

logout, configuration parameters for 9-46

M

makepsres(1) 13-5

Maximum Gain (Change User Preferences) 9-44

Maximum Keepalive Idle Time (Change Setup Parameters) 9-36

Maximum Model Clip Planes (Change Setup Parameters) 9-33

Maximum Nameset Names (Change Setup Parameters) 9-33

Maximum Non-Ambient Lights (Change Setup Parameters) 9-33

Maximum Retransmissions (Change Setup Parameters) 9-36

Maximum Retries (Change Setup Parameters) 9-28

Maximum TCP/IP connections (Change Setup Parameters) 9-16

: displaying 11-8, 11-9
: information, displaying 16-8
: statistics 10-27

buffer, size of 18-7

common to all modules 18-8 to 18-15

configuration parameters for 9-20, 9-46

configuring 18-6 to 18-7

displaying

: Console Messages area 18-5
: TELNET connection 18-5

explanations of

extended 18-7

format 18-3 to 18-4

logging 18-6

overview 18-2 to 18-3

time stamps 18-6

MIRRORD messages 18-82

modules, X server see X server

modules-directory 9-4, 9-29

modules-loaded 10-8

modules-load-policy 9-29

: dots-per-inch, setting 11-13
: power management, configuration parameters for 9-52
: resolution, setting 11-13

MOP (Maintenance Operations Protocol)

: boot requests, disabling 4-5
: order of use in booting 4-8
: server download sequence 4-1, 4-3

MOP Identify Timeout (Change Setup Parameters) 9-31

MOP Reset Password (Change Setup Parameters) 9-11

Motif Window Manager, diagnostic messages 18-84

Mouse Buttons (Change Setup Parameters) 9-25

mouse, configuration parameters for 9-25, 9-51

MPEGPLAY messages 18-83

multi-homed hosts 3-15

MWM messages 18-84

N

N-101 keyboards

: Boot Monitor, accessing from 17-14
: escape sequences (in Terminal Emulator) 12-36 to 12-38
: keycodes 17-15
: keymap 17-16 to 17-21
: LEDs 17-14
: legends 17-15
: Setup key combination 17-14
: Windows 95-compatible version 17-14

N-102 keyboards

: dead keys (in Terminal Emulator) 12-45
: escape sequences (in Terminal Emulator) 12-36 to 12-38

N-107 keyboards

: Boot Monitor, accessing from 17-37
: keycodes 17-38
: keymap 17-39 to 17-44
: LEDs 17-37
: legends 17-38
: Setup key combination 17-37

N-108 keyboards

: Boot Monitor, accessing from 17-22
: keycodes 17-24
: keymap 17-25 to 17-36
: LEDs 17-22
: legends 17-24
: N-108LK escape sequences (in Terminal Emulator) 12-39 to 12-42
: N-108LK function keys (in Terminal Emulator) 12-29
: Setup key combination 17-22

N-123 keyboards

: Boot Monitor, accessing from 17-45
: keycodes 17-46
: keymap (with OpenWindows) 17-47 to 17-54
: LEDs 17-45
: legends 17-46

: Boot Monitor, accessing from 17-5
: escape sequences (in Terminal Emulator) 12-43 to 12-44
: keycodes 17-6
: keymap 17-7 to 17-13
: LEDs 17-5
: legends 17-6

name cache 5-9 to 5-11

Name Cache Max Lifetime (Change Setup Parameters) 9-32, 9-37

Name Cache Max Size (Change Setup Parameters) 9-32, 9-37

Name Server Protocol (Change Setup Parameters) 9-37

Name Server Retransmission Timeout (Change Setup Parameters) 9-37

Name Server Transaction Timeout (Change Setup Parameters)

: for DECnet name service 9-32
: for TCP/IP name service 9-37

Name Servers (Change Setup Parameters)

: for DECnet name service 9-32
: for TCP/IP name service 9-37

: configuration parameters for 9-37
: enabling 5-7
: name cache, local 5-9 to 5-12
: name server hosts, specifying 5-8
: protocol, selecting 5-8
: remote configuration file entries for 5-7
: reverse name request 5-12
: statistics 10-24 to 10-25

Name Type for Initial TFTP servers (Change Quick Setup) 9-4

Name Type for Initial TFTP Servers (Change Setup Parameters) 9-22

Narrow Keysym Tables (Change Setup Parameters) 9-24

NCD Display Manager

: configuration parameters for 9-30
: defined 8-5
: diagnostic messages 18-87

NCD Display Manager Enabled (Change Setup Parameters) 9-30

NCD Display Manager TCP Port Number 9-30

NCD Mosaic Browser

: configuration parameters for 9-16 to 9-17
: diagnostic messages 18-75, 18-85, 18-100

NCD Terminal Emulator, see Terminal Emulator

NCD Window Manager

: diagnostic messages 18-134

ncd_std remote configuration file 6-24

NCD3270 Default Model (Change Setup Parameters) 9-42

NCD3270 Default Protocol (Change Setup Parameters) 9-42

NCDDM messages 18-87

: configuration parameters for 9-30
: defined 8-5
: diagnostic messages 18-87

ncdloadprefs(1) 6-21

ncdmkfdir(1) 13-11

NCDnet Address (Change Quick Setup) 9-5

NCDnet Address (Change Setup Parameters) 9-31

NCDnet Address at Next Boot (Change Quick Setup) 9-5

NCDnet Address At Next Boot (Change Setup Parameters) 9-31

NCDnet Name Servers (Change Quick Setup) 9-6

NCDnet Object Name (Change Setup Parameters)

: for Configuration daemon 9-19
: for Diagnostic daemon 9-21
: for Local File Manager 9-21
: for Preferences daemon 9-20

NCDnet Router Address (Change Quick Setup) 9-6

NCDnet, see DECnet

ncdnet-address 9-5, 9-31

ncdnet-address-at-next-boot 9-5, 9-31

ncdnet-bytes-received 10-9

ncdnet-bytes-sent 10-9

ncdnet-connect-timeout 9-31

ncdnet-count-circuit-down 10-9

ncdnet-data-blocks-received 10-9

ncdnet-data-blocks-sent 10-9

ncdnet-default-router 9-6, 9-31

ncdnet-hello-packets-received 10-9

ncdnet-hello-packets-sent 10-9

ncdnet-hello-timeout 9-31

ncdnet-inbound-errors 10-9

ncdnet-keepalive-timeout 9-31

ncdnet-mop-allow-reset 9-31

ncdnet-mop-identify-timeout 9-31

ncdnet-mop-reset-password 9-11

ncdnet-name-bad-name-errors 10-10

ncdnet-name-cache-hits 10-10

ncdnet-name-cache-max-lifetime 9-32

ncdnet-name-cache-max-size 9-32

ncdnet-name-cache-overflows 10-10

ncdnet-name-local-cache 9-32

ncdnet-name-memory-allocation-failures 10-11

ncdnet-name-no-server-responses 10-10

ncdnet-name-no-such-name-errors 10-10

ncdnet-name-numerical-addresses 10-10

ncdnet-name-requests 10-10

ncdnet-name-server-hits 10-10

ncdnet-name-server-response-errors 10-10

ncdnet-name-servers 9-6, 9-32

ncdnet-name-server-transaction-timeout 9-32

ncdnet-name-system-errors 10-10

ncdnet-node-address 10-9

ncdnet-outbound-errors 10-9

ncdnet-retransmission-limit 9-31

ncdnet-router-timeout 9-31

ncdnet-seconds-since-zeroed 10-9

ncdnet-user-account-name 9-31

ncdquery(1) 16-7

ncdreset(1) 16-10 to 16-12

ncdrunterm, see Terminal Emulator

ncdterm, see Terminal Emulator

: diagnostic messages 18-134
: in XDM session management files 8-8

net-arp-table-entry-buffers 10-12

net-available-buffers 10-11

net-available-cluster-buffers 10-11

net-buffer-not-available-errors 10-11

net-buffer-waits 10-11

net-connection-control-structure-buffers 10-12

net-connection-name-buffers 10-12

net-connection-option-buffers 10-12

NETD messages 18-88

net-domain-channel 9-33

net-ethernet-snap-encapsulation 9-32

NETFILE messages 18-88

net-interface-address-buffers 10-12

net-interfaces-table 10-13

net-number-of-interfaces 10-13

net-packet-data-buffers 10-12

net-packet-fragment-reassembly-buffers 10-12

net-packet-header-buffers 10-12

net-protocol-control-structure-buffers 10-12

net-reserved-data-buffers 10-11

net-roaming-condition 9-32

NETSRV messages 18-94

net-token-ring-speed 9-32

net-total-buffers 10-11

net-total-cluster-buffers 10-11

: buffers, statistics 10-11
: connection requests, diagnostic daemons 18-88
: interfaces, statistics 10-13
: TCP performance tuning 5-31 to 5-34

network services

: address discovery 3-1 to 3-16
: address resolution 5-5 to 5-6
: booting 4-1 to 4-19
: defaults 5-3 to 5-4
: file access 5-13 to 5-24
: name service 5-7 to 5-12
: overview 5-1 to 5-2
: routing 5-25 to 5-31
: time service 9-38
: X server loading 4-1 to 4-19

nf command (Boot Monitor) 11-8

NFS (Network File System)

: auto-save of configuration data 6-35
: booting 4-3, 4-5, 4-8, 4-13
: file service 5-22 to 5-23
: font service 7-6
: message logging 18-6
: statistics 10-13 to 10-16
: unmount timer 5-23

NFS Directory (Change Setup Parameters) 9-15

NFS Server Access Control Default (Change Setup Parameters) 9-12

NFS Server Access Control List (Change Setup Parameters) 9-12

NFS Unmount Timeout (Change Setup Parameters) 9-22

nfs-directory-contents-requests 10-14

nfs-directory-create-requests 10-14

nfs-directory-remove-requests 10-14

nfs-file-create-requests 10-14

nfs-file-remove-requests 10-14

nfs-file-rename-requests 10-14

nfs-get-attributes-requests 10-13

nfs-get-file-system-stats-requests 10-15

nfs-get-root-requests 10-13

nfs-link-create-requests 10-14

nfs-null-requests 10-13

nfs-path-lookup-requests 10-13

nfs-read-data-requests 10-14

nfs-read-symlink-requests 10-13

nfs-received-directory-contents-requests 10-16

nfs-received-directory-create-requests 10-16

nfs-received-directory-remove-requests 10-16

nfs-received-file-create-requests 10-15

nfs-received-file-remove-requests 10-15

nfs-received-file-rename-requests 10-15

nfs-received-get-attributes-requests 10-15

nfs-received-get-file-system-stats-requests 10-16

nfs-received-get-root-requests 10-15

nfs-received-link-create-requests 10-16

nfs-received-null-requests 10-15

nfs-received-path-lookup-requests 10-15

nfs-received-read-data-requests 10-15

nfs-received-read-symlink-requests 10-15

nfs-received-set-attributes-requests 10-15

nfs-received-symlink-create-requests 10-16

nfs-received-write-data-cache-requests 10-15

nfs-received-write-data-requests 10-15

nfs-set-attributes-requests 10-13

nfs-symlink-create-requests 10-14

nfs-write-data-cache-requests 10-14

nfs-write-data-requests 10-14

Nominal Edge Width (Change User Preferences) 9-50

Nominal Line Width (Change User Preferences) 9-50

Nominal Marker Size (Change User Preferences) 9-50

Number of colors (Change Setup Parameters) 9-40

nv command (Boot Monitor) 11-8, 11-20

: addresses, storing in 3-11, 11-14
: configuration parameters saved in 11-40
: contents of 11-24 to 11-43
: optional string space 11-39
: reading values from 9-7
: saving data to 6-35, 11-12

: commands 11-20 to 11-21
: sample sessions 11-21
: starting 11-20

O

Offset from Greenwich Mean Time (Change Setup Parameters) 9-38

Open Timeout (Change Setup Parameters) 9-24

: configuration parameters for 9-48
: diagnostic messages 18-95

Optional Features (Change Setup Parameters) 9-28

outline fonts, see font server

P

Parallel Daemon LAT Service Passwords (Change Setup Parameters) 9-12

Parallel Daemons Table (Change Setup Parameters) 9-33

: access control 15-10
: configuration parameters for 9-33
: configuring 15-8
: statistics 10-16
: uses for 15-2

parallel-daemons-lat-service-passwords 9-12

parallel-daemons-table 9-33

Password (Change Setup Parameters, File Manager Section) 9-12

: displaying 6-5
: LAT 9-12
: lock screen 9-46
: saved in NVRAM optional string space 11-39
: SNMP community names 16-4, 16-6

: messages 18-78
: see also Local File Manager; Local File Manager

Permit Old X Bugs (Change User Preferences) 9-45

Persist in Loading (Change Setup Parameters) 9-14

Persistent Loading (Change Setup Parameters) 9-18

: 3D mouse 14-13
: configuration parameters for 9-33 to 9-35, 9-50, 14-3 to 14-13
: digitizing tablet 14-13
: fonts 14-2
: input devices 14-13
: licensing 14-3
: requirements 14-3
: terminals supported on 14-1
: troubleshooting 14-14

pex-max-model-clip-planes 9-33, 14-3

pex-max-nameset-names 9-33, 14-4

pex-max-non-ambient-lights 9-33, 14-4

pex-monitor-reference-blue-u 9-34, 14-6

pex-monitor-reference-blue-v 9-34, 14-6

pex-monitor-reference-blue-y 9-34, 14-6

pex-monitor-reference-green-u 9-34, 14-6

pex-monitor-reference-green-v 9-34, 14-7

pex-monitor-reference-green-y 9-34, 14-7

pex-monitor-reference-red-u 9-34, 14-7

pex-monitor-reference-red-v 9-34, 14-7

pex-monitor-reference-red-y 9-34, 14-8

pex-monitor-reference-white-u 9-35, 14-8

pex-monitor-reference-white-v 9-35, 14-8

pex-monitor-reference-white-y 9-35, 14-8

Physical Location (Change Setup Parameters) 9-38

pi command (Boot Monitor) 11-9

pointing devices, configuration parameters for 9-51

: 3270 terminal emulator 9-42
: Configuration daemon 6-28
: NCD Display Manager 9-30
: Preferences daemon 6-29
: XRemote 9-41
: see also serial port; parallel port

power management (monitor), configuration parameters for 9-52

Powerdown After (Change User Preferences) 9-52

: configuration parameters for 9-35
: diagnostic messages 18-97

PPP and SLIP Interfaces Table (Change Setup Parameters) 9-35

PPP Interfaces Table (Change Setup Parameters) 9-35

PPPD messages 18-97

ppp-interfaces-table 9-35

ppp-slip-interfaces-table 9-35

pref-audio-maximum-gain 9-44

pref-bell-duration 9-45

pref-bell-enable 9-45

pref-bell-pitch 9-45

pref-bell-volume 9-45

pref-compatibility-decwindows-images 9-45

pref-compatibility-decwindows-keyboard 17-13, 17-21, 17-30, 17-36

pref-compatibility-decwindows-keyboards 9-45

pref-compatibility-decwindows-vendor-string 9-45

pref-compatibility-permit-old-x-bugs 9-45

pref-console-auto-lock-idle-time 9-46

pref-console-auto-logout-cancel-delay 9-46

pref-console-auto-logout-idle-time 9-46

pref-console-blank-screen-delay 9-46

pref-console-key-sequence 9-46

pref-console-lock-screen-default-password 9-46

pref-console-show-timestamps 9-46

pref-environment 9-47

Preferences daemon

: configuration parameters for 9-20
: defined 6-2
: ports for accessing 6-29
: starting from Terminal Emulator 12-2

pref-font-extended-diagnostics 7-17, 9-47, 18-49

pref-font-path 7-12, 9-47

pref-keyboard-auto-repeat 9-47

pref-keyboard-auto-repeat-rate 9-48

pref-keyboard-auto-repeat-start 9-47

pref-keyboard-function-key-style 9-47

pref-keyboard-keyclick-volume 9-48

pref-keyboard-leds 9-48

pref-mouse-acceleration 9-51

pref-mouse-arrangement 9-51

pref-mouse-threshold 9-51

pref-pex-color-clipping-method 9-50, 14-12

pref-pex-dither-flat-shaded-surface 9-50, 14-10

pref-pex-dither-interpolated-surface 9-50, 14-10

pref-pex-nominal-edge-width 9-50, 14-9

pref-pex-nominal-line-width 9-50, 14-9, 14-10

pref-pex-nominal-marker-size 9-50

pref-pex-surface-interior-style 9-50, 14-11

pref-pex-surface-interp-method 9-50, 14-11

pref-pex-surface-reflect-model 9-50, 14-12

pref-power-manage-enable 9-52

pref-power-manage-powerdown-time 9-52

pref-power-manage-standby-time 9-52

pref-power-manage-suspend-time 9-52

pref-screen-background-bitmap-background 9-53

pref-screen-background-bitmap-file 9-52

pref-screen-background-bitmap-foreground 9-53

pref-screen-background-color 9-52

pref-screen-background-type 9-52

pref-screensaver-bitmap-file 9-53

pref-screensaver-enable 9-53

pref-screensaver-exposures 9-53

pref-screensaver-interval 9-53

pref-screensaver-style 9-53

pref-screensaver-time 9-53

pref-sie-contrast-threshold 9-54

pref-sie-sampling-method 9-54

pref-xserver-backing-store 9-54

pref-xserver-benchmark-optimizations 9-54

pref-xserver-current-pointing-device 9-51

pref-xserver-graphics-optimizations 9-54

pref-xserver-screen-resolution 9-54

pref-xserver-touchscreen-button-press-threshold 9-51

pref-xserver-touchscreen-button-release-threshold 9-51

Previous Server (Change Setup Parameters) 9-14

Previous Source (Change Setup Parameters) 9-14

Primary Boot Source (Change Setup Parameters) 9-14

PRINTAPIS messages 18-100

protect command (Configuration language) 6-32

PU2.1 Default Host (Change Setup Parameters) 9-42

PU2.1 Default tcp Port (Change Setup Parameters) 9-42

pwireless-interface-table 10-28

pwireless-statistics-table 10-28

Q

: Query for Unit Name at Boot (Change Setup Parameters) 9-38

R

RARP (Address Resolution Protocol) 3-10

rarpd(8) 3-10

read command (Configuration language) 6-19 to 6-20

Read Timeout (Change Setup Parameters) 9-24

Receive Buffer Size (Change Setup Parameters) 9-36

Reconnect attempts before failure (Change Setup Parameters) 9-24

Reference Blue Chromaticity (Change Setup Parameters) 9-34

Reference Blue Luminance (Change Setup Parameters) 9-34

Reference Green Chromaticity (Change Setup Parameters) 9-34

Reference Green Luminance (Change Setup Parameters) 9-34

Reference Red Chromaticity (Change Setup Parameters) 9-34

Reference Red Luminance (Change Setup Parameters) 9-34

Reference White Chromaticity (Change Setup Parameters) 9-35

Reference White Luminance (Change Setup Parameters) 9-35

registers, displaying 11-8

remote configuration

apply command 6-34

assignment statements 6-11, 6-14

assignments, order of 6-14

auto-save 6-34 to 6-37

configuration commands 6-7 to 6-11

get-protect command 6-33

parameters

: "<GET-PROTECTED>" value 6-32
: "default" parameter value 6-12
: "nil" parameter value 6-5
: accessing through SNMP 16-9
: assigning values 6-11 to 6-12
: default values 6-12
: filenames as parameter values 6-13
: groups 6-5
: multiple assignments of same parameter 6-14
: protecting 6-32 to 6-33
: saved in NVRAM 11-40
: saved in optional string area 11-39
: tables, assigning values 6-11 to 6-12
: write-only 6-5

protect command 6-32

read command 6-19 to 6-20

remote terminal, accessing 9-8

set-protect command 6-33

syntax rules 6-13 to 6-15

see also remote configuration files

remote configuration files

auto-save file 6-36

comments in 6-14

configuration parameters for 9-18

creating 6-16 to 6-21

: by ncdinstall 6-17
: from sample file 6-17
: from Setup menus 6-18

directory for 6-26

downloading

: disabling 6-25, 6-27
: hosts for 6-21
: initial file servers 5-13, 6-21
: persistent 6-21
: sequence of filenames 6-23

file permissions 6-18

file size not restricted 6-18

filenames

: custom 6-23
: hexadecimal, converting to 6-17
: optional 6-23
: standard 6-16, 6-23 to 6-25

hexadecimal, converting IP address to 6-17

ncd_std generic file 6-24

nesting files 6-19

NVRAM, saving data to 6-15

Restore Defaults, file for 6-27

sample file 6-17

.stp file 6-36

user's file, including 6-20

see also remote configuration; Setup menus (Console)

remote reset (using SNMP) 16-10 to 16-12

Reopen Timeout (Change Setup Parameters) 9-24

Rescan Messages command (Console) 18-5

reset, remote 16-10 to 16-12

Respond to Broadcast ICMP (Change Setup Parameters) 9-26

Restore Defaults (Setup menus) 6-27

Restrict Host Choices (Change Setup Parameters)

: for login through the Terminal Emulator 9-39
: for login through XDM 9-29

Retain X Settings Across Sessions (Change Setup Parameters) 9-40

Retransmission Limit (Change Setup Parameters) 9-28, 9-31

Retransmission Timeout (Change Setup Parameters) 9-28

reverse name request 3-15

RGB File (Change Setup Parameters) 9-40

rgb.txt file

: default location 5-15
: initial file server hosts 5-13
: renaming 9-40

Ring Bell (Change User Preferences) 9-45

Roaming Condition (Change Setup Parameters) 9-32

Router Timeout (Change Setup Parameters) 9-31

configuration parameters for 9-25

gateways

: boot host, used as gateway 5-25
: default 5-25

messages 18-56

proxy ARP 5-29

router discovery 5-30

routing table 5-26 to 5-29

Routing Table (Change Setup Parameters) 9-26

rs command (Boot Monitor) 11-9

RTLD messages 18-104

S

Save Screen After (Change User Preferences) 9-53

Screen Background Type (Change User Preferences) 9-52

screen background, configuration parameters for 9-52

screen resolution

: displaying 9-54
: setting 11-13

Screen Resolution (Change User Preferences) 9-54

Screen Saver Bitmap File (Change User Preferences) 9-53

Screen Saver Style (Change User Preferences) 9-53

screen saver, configuration parameters for 9-53

se command (Boot Monitor) 11-9, 11-12

Secondary Boot Source (Change Setup Parameters) 9-14

Secondary TCP/IP Server (Change Setup Parameters) 9-14

security, see access control; passwords

Send Broadcast ICMP for Subnet Mask (Change Setup Parameters) 9-15

Send Buffer Size (Change Setup Parameters) 9-36

Serial and Parallel Access Control List (Change Setup Parameters) 9-13

Serial Daemon LAT Service Passwords (Change Setup Parameters) 9-12

Serial Daemons Table (Change Setup Parameters) 9-35

Serial Interfaces Table (Change Setup Parameters) 9-35

access control 15-10

configuration parameters for 9-35

configuring

: serial-daemons-table 15-6 to 15-8
: serial-interfaces-table 15-2 to 15-6

diagnostic messages 18-107

numbering (1 through 3) 15-2

serial sessions, automatic display in Terminal Host Chooser 12-3

serial terminal emulation, configuring 12-3

statistics 10-17 to 10-18

system console, configuring terminal as 15-9

uses for 15-1

serial-access-control-enabled 9-13, 15-10

serial-access-control-list 9-13

SERIALD messages 18-107

serial-daemons-lat-service-passwords 9-12

serial-daemons-table 9-35

serial-interfaces-table 9-35, 12-4, 14-14, 15-2, 15-9

Service Directory Max Size (Change Setup Parameters) 9-27

Service Groups (Change Setup Parameters) 9-27

set-protect command (Configuration language) 6-32, 6-33

Setup (Boot Monitor)

: keymapper for 11-18
: navigating in 11-13
: setting parameters 11-13 to 11-17
: starting 11-12

Setup menus (Console)

auto-save 6-34 to 6-37

Change Quick Setup

: commands and buttons 9-1 to 9-2
: fields, corresponding parameters 9-3 to 9-6
: fields, described 9-3 to 9-6
: remote terminal, configuring 9-2

Change Setup Parameters

: commands and buttons 9-7 to 9-8
: fields, corresponding parameters 9-8 to 9-42
: fields, described 9-8 to 9-42
: remote terminal, configuring 9-7

Change User Preferences

: commands and buttons 9-43 to 9-44
: fields, corresponding parameters 9-44 to 9-54
: fields, described 9-44 to 9-54
: remote terminal, configuring 9-43

connecting to remote terminal through 9-2

disabling 6-34

Restore Defaults 6-27

see also terminal configuration; remote configuration

Show Console Message Timestamps (Change User Preferences) 9-46

Show Extended Font Diagnostics (Change User Preferences) 9-47

Show Low Memory Warning Box at (Change Setup Parameters) 9-39

Show Statistics (Console)

: commands and buttons 10-1 to 10-2
: fields, corresponding parameters 10-2 to 10-31
: fields, descriptions 10-2 to 10-31
: remote terminal, connecting to 10-1
: starting 10-1

Show Tool Bar (Change Setup Parameters) 9-16

: configuration parameters for 9-54
: diagnostic messages 18-109

SIE Contrast Threshold (Change User Preferences) 9-54

SIE Sampling Method (Change User Preferences) 9-54

: configuration parameters for 9-35
: diagnostic messages 18-97

sm command (Boot Monitor) 11-9

SMTP Email Server (Change Setup Parameters) 9-17

SNMP Read-Only Community (Change Setup Parameters) 9-10

SNMP (Simple Network Management Protocol)

access control 16-3 to 16-7

community names 16-3 to 16-7

components 16-1

connecting to a terminal 16-10

diagnostic messages 18-109

host requirements 16-1, 16-3

manager hosts 16-3

MIB files

: default locations 16-2
: defined 16-2
: mib.my file 16-2
: mib.txt file 16-2
: MIBFILE environment variable 16-3

monitor hosts 16-5 to 16-6

ncdquery 16-7 to 16-8

ncdreset 16-10, 16-11

object names and paths for configuration parameters 16-2

overview 16-1 to 16-3

rebooting 16-10

remote reset/reboot 16-10 to 16-12

statistics 10-18 to 10-21

trap events 16-6

variables

: reading 16-7
: writing 16-9

X session, restarting 16-10

SNMP Read-Only Access Control List (Change Setup Parameters) 9-11

SNMP Read-Only Alternative Community (Change Setup Parameters) 9-10

SNMP Read-Write Access Control List (Change Setup Parameters) 9-11

SNMP Read-Write Alternative Community (Change Setup Parameters) 9-11

SNMP Read-Write Community (Change Setup Parameters) 9-11

SNMP Trap Monitors (Change Setup Parameters) 9-11

snmp-allow-reset 9-11, 16-11, 16-12

snmp-bad-variable-name-error-responses-received 10-19

snmp-bad-variable-name-error-responses-transmitted 10-20

snmp-bad-variable-values-error-responses-received 10-19

snmp-bad-variable-values-error-responses-transmitted 10-20

SNMPD messages 18-109

snmp-general-error-responses-received 10-19

snmp-general-error-responses-transmitted 10-20

snmp-get-next-requests-received 10-20

snmp-get-next-requests-transmitted 10-20

snmp-get-requests-received 10-19

snmp-get-requests-transmitted 10-20

snmp-get-responses-received 10-20

snmp-get-responses-transmitted 10-20

snmp-packets-received 10-18

snmp-packets-received-with-asn1-errors 10-19

snmp-packets-received-with-bad-community-names 10-18

snmp-packets-received-with-bad-community-uses 10-18

snmp-packets-received-with-bad-variable-types 10-19

snmp-packets-received-with-bad-versions 10-18

snmp-packets-transmitted 10-18

snmp-read-only-access-control-enabled 9-11, 16-5

snmp-read-only-access-control-list 9-11, 16-5

snmp-read-only-community 9-10

snmp-read-only-community-alt 9-10

snmp-read-only-variable-error-responses-received 10-19

snmp-read-only-variable-error-responses-transmitted 10-20

snmp-read-write-access-control-enabled 9-11, 16-4, 16-11

snmp-read-write-access-control-list 16-4, 16-11

snmp-read-write-community 9-11, 16-11

snmp-read-write-community-alt 9-11

snmp-set-requests-received 10-20

snmp-set-requests-transmitted 10-20

snmp-too-big-error-responses-received 10-19

snmp-too-big-error-responses-transmitted 10-20

snmp-trap-monitors 9-11

snmp-traps-received 10-20

snmp-traps-transmitted 10-21

snmp-variable-gets-completed 10-19

snmp-variable-sets-completed 10-19

SOCKS Host (Change Setup Parameters) 9-17

SOCKS Port (Change Setup Parameters) 9-17

Solid Color (Change User Preferences) 9-52

Standby After (Change User Preferences) 9-52

Startup Commands (Change Setup Parameters) 9-18

Starworks volume file (Change Setup Parameters) 9-39

: DECnet 10-9 to 10-11
: displaying 10-1
: Ethernet 10-2
: font usage 10-3
: ICMP 10-3 to 10-5
: IP 10-6, 10-8
: memory 10-27
: name service 10-24 to 10-25
: network buffers 10-11
: network interfaces 10-13
: NFS 10-13
: parallel port 10-16
: serial port 10-17 to 10-18
: SNMP 10-18, 10-21
: TCP 10-21 to 10-23
: TFTP 10-25
: UDP 10-26
: wireless 10-28 to 10-29
: X server modules 10-8
: XRemote 10-30 to 10-31

: setting 3-13 to 3-15
: storing in NVRAM 3-11

Subnet Mask (Change Quick Setup) 9-5

Subnet Mask (Change Setup Parameters) 9-25

Sun Type 4-compatible keyboard 17-37

Sun Type 5-compatible keyboard 17-45

Surface Interior Style (Change User Preferences) 9-50

Surface Interpolation Method (Change User Preferences) 9-50

Surface Reflection Model (Change User Preferences) 9-50

Suspend After (Change User Preferences) 9-52

system console, configuring terminal as 15-9

T

configuration parameters for 9-36

default linger time, configuring 5-33

maximum retransmissions, configuring 5-33

performance tuning 5-31 to 5-34

ports

: 3270 terminal emulator 9-42
: Configuration daemon 9-19
: Diagnostic daemon 9-20
: for configuring terminals 6-28 to 6-29
: Local File Manager 9-21
: NCD Display Manager 9-30
: User Preferences daemon 9-20
: XRemote 9-41

segment sizes larger than the default 5-33

send and receive buffers 5-31

statistics 10-21 to 10-23

timeout, configuring 5-32

TCP Port Number (Change Setup Parameters)

: for Configuration daemon 9-19
: for Diagnostics daemon 9-20
: for Local File Manager 9-21
: for User Preferences daemon 9-20
: for XRemote 9-41

TCP/IP Name Servers (Change Quick Setup) 9-5

TCP/IP Name Service Protocol (Change Quick Setup) 9-5

TCP/IP Broadcast Boot Request (Change Setup Parameters) 9-15

TCP/IP Desired Server (Change Setup Parameters) 9-14

tcp-ack-only-packets-transmitted 10-23

tcp-ack-packets-received 10-23

tcp-active-connect-attempts 10-21

tcp-connections-reset 10-22

tcp-connections-timed-out-on-keepalives 10-22

tcp-connections-timed-out-on-retransmissions 10-22

tcp-connection-table 10-23

tcp-connect-timeout 5-32, 9-36

tcp-default-linger-time 5-33, 9-36

tcp-default-mss-for-non-local 5-33

tcp-established-connections 10-22

tcp-failed-connect-attempts 10-22

tcpip-arp-cache 5-5, 9-13

tcpip-arp-complete-entry-timeout 5-6, 9-13

tcpip-arp-incomplete-entry-timeout 5-6, 9-13

tcpip-dns-default-domain 5-9, 9-37

tcpip-dns-domain-search 9-37

tcpip-name-bad-name-errors 10-24

tcpip-name-cache-hits 10-24

tcpip-name-cache-max-lifetime 5-10, 9-37

tcpip-name-cache-max-size 5-11, 9-37

tcpip-name-cache-overflows 10-24

tcpip-name-local-cache 9-37

tcpip-name-memory-allocation-failures 10-25

tcpip-name-no-server-responses 10-24

tcpip-name-numerical-addresses 10-24

tcpip-name-requests 10-24

tcpip-name-server-hits 10-24

tcpip-name-server-protocol 5-8, 9-5, 9-37

tcpip-name-server-response-errors 10-24

tcpip-name-server-retransmission-timeout 5-11, 9-37

tcpip-name-servers 5-8, 9-5, 9-37

tcpip-name-server-transaction-timeout 5-11, 9-37

tcpip-name-system-errors 10-24

tcpip-no-such-name-errors 10-24

tcp-keepalive-idle-time 9-36

tcp-keepalive-interval 9-36

tcp-keepalive-packets-transmitted 10-23

tcp-maximum-number-of-connections 10-21

tcp-maximum-retransmission-time 10-21

tcp-max-keepalive-idle-time 9-36

tcp-max-retransmissions 5-33, 9-36

tcp-minimum-retransmission-time 10-21

tcp-packets-received 10-22

tcp-packets-retransmitted 10-23

tcp-packets-transmitted 10-22

tcp-packets-with-errors-received 10-23

tcp-passive-connects-attempts 10-21

tcp-receive-buffer-size 5-31, 9-36

tcp-reset-packets-transmitted 10-23

tcp-retransmission-algorithm-type 10-21

tcp-send-buffer-size 5-32, 9-36

for terminal configuration 6-28

for viewing messages 18-5

ports

: Configuration daemon 9-19
: Diagnostic daemon 9-20
: for configuring terminals 6-28 to 6-29
: Local File Manager 9-21
: User Preferences daemon 9-20

services in Terminal Host Chooser 12-3

Telnet Port Number (Change Setup Parameters)

: for Configuration daemon 9-19
: for Diagnostic daemon 9-20
: for Local File Manager 9-21
: for User Preferences daemon 9-20

TERM messages 18-110

term, see Terminal Emulator

term-default-connect-timeout 9-39

term-default-hosts 9-39

term-delay-lat-display 9-39

terminal configuration

access control 6-30 to 6-34

Boot Monitor Setup menus 11-12 to 11-19

default terminal configuration, defined 6-2

diagnostic messages 18-18

methods overview 6-2 to 6-5

NVRAM utility 11-20 to 11-39

parameters

: groups 6-5 to 6-7
: types 6-5

Setup menus (Console) 9-1 to 9-54

using SNMP 16-7

using TELNET 6-28

see also remote configuration; remote configuration files; Setup menus (Console); Setup (Boot Monitor); NVRAM utility

Terminal Default Connect Timeout (Change Setup Parameters) 9-39

Terminal Emulator

answer-back message 12-12

character coding 12-52 to 12-58

character sets supported 12-52

color text, configuring 12-31

configuration parameters for 9-6, 9-39

Cursors menu 12-11

dead-key support 12-45

diagnostic messages 18-110

disconnecting, delay 12-12

escape sequences 12-13 to 12-34

File menu, configuring 12-6

fonts

: choosing 12-5
: Default 12-10
: Fonts menu 12-10

icon titles, configuring 12-31

key translations 12-4

keyboards

: compose sequences 12-45 to 12-51
: downloadable descriptions 17-55
: escape sequences 12-35 to 12-44

Keys menu 12-11

N-108LK function keys, programming 12-29

Options menu, configuring 12-8

resources

: answerbackString 12-12
: appCursorMode 12-9
: appKeypadMode 12-9
: autoLineFeed 12-8
: autoWrap 12-8
: blinkCursor 12-10
: c132 12-9
: clearScreenWithBlanks 12-9
: curses 12-9
: defaultHost 12-7
: disableExits 12-6, 12-7
: disconnectDelay 12-12
: family 12-11
: foundry 12-11
: jumpScroll 12-8
: latin1Font 12-10
: localFlowControl 12-9
: marginBell 12-9
: menuBar 12-6, 12-8
: pointSize 12-11
: printerHost 12-7
: rectangularCutLineTerminator 12-12
: reverseVideo 12-8
: reverseWrap 12-8
: saveLines 12-6
: scrollbar 12-6
: secureKeyboard 12-10
: showAvailableLat 12-3
: showCTerm 12-3
: showDefaultLat 12-3
: showLocal 12-2
: showSerial 12-3
: showTelnet 12-3
: statusLine 12-10
: stripParity 12-10
: subFont 12-11
: useCondensedFont 12-9
: visualBell 12-8

scroll bars, configuring 12-6

selecting text, terminator for 12-12

serial connections, configuring 12-3

status line, configuring 12-28

Terminal Host Chooser

: local service connections 12-2
: X resources for 12-3

window titles, configuring 12-31

Terminal IP Address At Next Boot (Change Quick Setup) 9-5

Terminal Session (Change Quick Setup) 9-6

term-restrict-host-choices 9-39

Tertiary Boot Source (Change Setup Parameters) 9-14

Tertiary TCP/IP Server (Change Setup Parameters) 9-14

Test RAM at power-up (Change Setup Parameters) 9-13

: auto-save of configuration data 6-35
: booting 4-1, 4-5, 4-8, 4-12
: file service 5-20 to 5-22
: statistics 10-25

TFTP Directory (Change Setup Parameters) 9-15

tftp-ack-packets-received 10-25

tftp-ack-packets-transmitted 10-26

tftp-bad-access-error-responses-received 10-25

/tftpboot directory 4-14

tftpd(8) 5-21

tftp-data-packets-received 10-25

tftp-data-packets-transmitted 10-25

tftp-disk-full-error-responses-received 10-25

tftp-file-read-requests-transmitted 10-25

tftp-file-write-requests-transmitted 10-25

tftp-no-available-buffer-errors 10-25

tftp-no-file-error-responses-received 10-25

tftp-packets-retransmitted 10-26

Threshold Distance (Change User Preferences) 9-51

Time Server (Change Setup Parameters) 9-38

Time Server Retries (Change Setup Parameters) 9-38

Time Server Timeout (Change Setup Parameters) 9-38

time service, configuration parameters for 9-38

time-offset-from-gmt 9-38

time-server 9-38

time-server-retries 9-38

time-server-timeout 9-38

Timestamp Frequency (Change Setup Parameters) 9-20

time-zone 9-38

Timezone (Change Setup Parameters) 9-38

TN3270 Default Host (Change Setup Parameters) 9-42

TN3270 Default tcp Port (Change Setup Parameters) 9-42

: configuration parameters for 9-32
: current and built-in addresses 3-7
: diagnostic messages 18-123
: interface speed, setting (HMX terminals) 11-9

TOKENRING messages 18-123

Token-Ring Speed (Change Setup Parameters) 9-32

tokring-interface-table 10-26

tokring-statistics-table 10-26

: configuration parameters for 9-25, 9-51
: diagnostic messages 18-17

tr command (Boot Monitor) 11-9

trademarks, NCD i

Transaction Timeout (Change Setup Parameters) 9-28

Try All Matches on Open (Change Setup Parameters) 9-22

Try Generic Filename (Change Setup Parameters) 9-19

Try MOP (Change Setup Parameters) 9-15

Try MOP with File Name (Change Setup Parameters) 9-15

Try TCP/IP Product Name and Memory Size File (Change Setup Parameters) 9-15

Try TCP/IP Product Name and Memory Size with Path File (Change Setup Parameters) 9-15

Try TCP/IP Product Name File (Change Setup Parameters) 9-15

Try TCP/IP Product Name with Path File (Change Setup Parameters) 9-15

Try TCP/IP Unit Address File (Change Setup Parameters) 9-15

Try TCP/IP Unit Address with Path File (Change Setup Parameters) 9-15

Try Unit Ethernet Address as Filename (Change Setup Parameters) 9-19

Try Unit IP Address as Filename 9-19

Try Unit Name as Filename (Change Setup Parameters) 9-19

Try Unit NCDnet Address as Filename (Change Setup Parameters) 9-19

U

ud command (Boot Monitor) 11-9

UDP, statistics 10-26

udp-listener-table 10-27

udp-packets-received 10-26

udp-packets-received-with-errors 10-26

udp-packets-received-with-unknown-port 10-26

udp-packets-transmitted 10-26

UI messages 18-126

Unit Global Password (Change Setup Parameters) 9-9

Unit Name (Change Setup Parameters) 9-38

unit-administrative-status 9-38, 16-11, 16-12

unit-blocks-of-available-memory 10-28

unit-boot-monitor-version 10-27

unit-code-memory-installed 10-27

unit-contact 9-38

unit-floating-point-exceptions 10-28

unit-global-password 9-9

unit-idle-time 10-27

unit-keyboard-controller-version 10-27

unit-licensed-features 9-5, 9-28

unit-license-key 9-5, 9-28

unit-location 9-38

unit-low-memory-level 9-39

unit-memory-available 10-28

unit-memory-installed 10-27

unit-name 9-38

unit-optional-features 9-28

unit-query-for-name-at-boot 3-15, 5-12, 9-38

unit-snmp-system-object-id 10-27

unit-tcpip-service-level 10-27

unit-terminal-model 10-27

unit-time-since-boot 10-27

unit-version 10-27

UNIX Config Directory (Change Quick Setup) 9-4

UNIX Directory (Change Setup Parameters) 9-18

up command (Boot Monitor) 11-9, 11-10

Use Address Discovery (Change Quick Setup) 9-5

Use Address Discovery (Change Setup Parameters) 9-26

Use Backing Store (Change User Preferences) 9-54

Use Decimal IP Address Notation as Filename (Change Setup Parameters) 9-19

Use Proxy Arp (Change Setup Parameters) 9-26

Use Router Discovery (Change Setup Parameters) 9-26

Use Router Solicit (Change Setup Parameters) 9-26

Use SNAP (802.2 LLC) Encapsulation on Ethernet (Change Setup Parameters) 9-32

Use WinCenter Colors (Change Setup Parameters) 9-40

User Account Name (Change Setup Parameters) 9-31

User Preferences daemon

: configuration parameters for 9-20
: defined 6-2
: ports for accessing 6-29
: starting from Terminal Emulator 12-2

User Preferences Read-Only Password (Change Setup Parameters) 9-10

User Preferences Read-Write Password (Change Setup Parameters) 9-10

/usr/lib/X11/ncd/configs directory 6-26

/usr/lib/X11/ncd/dps (DPS directory) 13-10

/usr/lib/X11/ncd/fs (font server directory) 7-23

/usr/lib/x11/ncd/snmp/ (SNMP directory) 16-2

V

: configuration parameters for 9-39
: diagnostic messages 18-83

VIDEO messages 18-83

VIDEODECODER messages 18-83

VIDEOPLAYER messages 18-83

visual, default 9-41

VMS Config Directory (Change Quick Setup) 9-4

VMS Directory (Change Setup Parameters) 9-18

VT220-compatible keyboards

: Boot Monitor, accessing from 17-22
: keycodes 17-23
: keymap 17-25 to 17-36
: LEDs 17-22
: legends 17-23
: Setup key combination 17-22

VT320 terminal emulation, see Terminal Emulator

W

Wait for Broadcasts for (Change Setup Parameters) 9-30

Wait for Keepalive Responses for (Change Setup Parameters) 9-30

wd command (Boot Monitor) 11-10

What to do when XDM disconnects (Change Setup Parameters) 9-30

What to do with XDMCP Broadcasts (Change Setup Parameters) 9-30

What to do with XDMCP Indirects (Change Setup Parameters) 9-30

White Pixel (Change Setup Parameters) 9-41

wincen command, diagnostic messages 18-128

WINCEN messages 18-128

WinCenter, configuration parameters for 9-40

wincenter-colors 9-40

wincenter-resources 9-40

Window Delay Time (Change Setup Parameters) 9-29

window managers

Motif Window Manager, diagnostic messages 18-84

NCD Window Manager

: diagnostic messages 18-134
: in session management files 8-8

Window Size (Change Setup Parameters) 9-40

Windows 95-compatible keyboard 17-14

: configuration parameters for 9-32
: diagnostic messages 18-129
: statistics 10-28 to 10-29

WIRELESS messages 18-129

WM messages 18-134

wr command (Boot Monitor) 11-10

Write Keyboard Description File (Change Setup Parameters) 9-24, 17-55

ws command (Boot Monitor) 11-10

X

X Access Control List (Change Setup Parameters) 9-9

X extensions, disabling 9-40

X resources, loading 8-7

diagnostic messages 18-1

directory

: default 4-2, 4-3
: non-standard 4-7, 4-14

filename links 4-14

filenames 4-1

: default 4-2
: disabling filenames 4-5
: non-standard 4-7

location of 4-7, 4-12, 4-13

modules

: configuration parameters for 9-29
: load policy 4-10 to 4-12
: loading, diagnostic messages 18-104
: statistics 10-8

protocols for loading 4-1

screen resolution reported by 9-54

version, displaying 16-8

see also booting

: restarting with SNMP 16-10
: see also XDM (X Display Manager)

X Session (Change Quick Setup) 9-6

X settings, retaining 9-40

Xaccess file 8-11 to 8-12

XAUTHORITY environment variable 8-16

XDM Authentication Key (Change Setup Parameters) 9-9

XDM (X Display Manager)

access control 8-15 to 8-16

components of 8-4

configuration files 8-6 to 8-14

configuration parameters for 9-6, 9-29

defaults 8-2

defined 8-3

diagnostic messages 18-79

disconnecting, terminal actions 8-17

DISPLAY variable automatically set 8-4

error message log 8-14

hosts

: configuring 8-5 to 8-15
: controlling access to 8-11 to 8-12

keepalives 8-18 to 8-19

login banner

: configuring 8-14
: delay before displaying 8-17

Login Chooser, redisplay of 8-17

MIT-MAGIC-COOKIE-1 8-16

OpenWindows environment 8-14, 8-15

polling interval, configuring 8-13

queries, types of 8-4

resources

: loading from session management files 8-7
: login box 8-14
: xdm program 8-13

userAuthDir resource 8-16

X session

: ending 8-17
: session management files, system-wide 8-7 to 8-10

X11R3 version 8-19

Xaccess file 8-11 to 8-12

.Xauthority file 8-16

XAUTHORITY environment variable 8-16

xdm daemon

: configuring 8-13 to 8-14
: starting 8-15

XDM-AUTHORIZATION-1 8-16

xdm-config file 8-13, 8-16

XDMCP, defined 8-4

xdm-errors file 8-14

xrdb(1) 8-14

Xreset file 8-6

Xresources file 8-14

Xservers file 8-19

.xsession file 8-7

Xsession file

: configuring 8-7 to 8-10
: for NCD local window manager 8-8
: for OpenWindows 8-9

Xstartup file 8-6

xdm (XDM daemon) 8-6, 8-13 to 8-14

XDM Display Class (Change Setup Parameters) 9-29

XDM Manufacturer Display ID (Change Setup Parameters) 9-29

xdm-config file 8-13, 8-16

xdm-errors file 8-14

xfd(1) 7-18

xfontsel(1) 7-18

XKeysymDB file 5-15

XLFD (X Logical Font Description) 7-2, 7-18

xlsfonts(1) 7-18

: OpenWindows version 8-14
: X resources, loading 8-7

: configuration parameters for 9-6, 9-41
: diagnostic messages 18-137, 18-139
: statistics 10-30 to 10-31

XREMOTE messages 18-137

XRemote Session (Change Quick Setup) 9-6

xremote-additional-escape-chars 9-41

xremote-authorize-xremote-clients 9-41

xremote-data-compression-mode 9-41

xremote-next-receive-sequence-number 10-31

xremote-next-transmit-sequence-number 10-31

xremote-oldest-unacknowledged-packet 10-31

xremote-packet-round-trip-time 10-30

xremote-packets-received 10-30

xremote-packets-received-out-of-sequence 10-30

xremote-packets-retransmitted 10-30

xremote-packets-transmitted 10-30

xremote-packets-with-errors-received 10-30

xremote-packet-transmission-errors 10-30

xremote-receive-window-size 10-31

xremote-state 10-30

xremote-tcp-port 9-41

xremote-time-out-length 10-30

xremote-transmit-window-size 10-30

xremote-xremotetcp-connections 9-41

xremote-xremote-version 10-30

Xreset file 8-6

Xresources file 8-14

XRPRINTD messages 18-139

XSERVER messages 18-140

xserver-access-control-enabled 9-9

xserver-access-control-enabled-default 9-9

xserver-access-control-list 9-9

xserver-arc-cache-max-size 9-40

xserver-black-pixel 9-41

xserver-default-colormap 9-41

xserver-default-font 7-13, 9-23

xserver-default-font-path 9-4, 9-23

xserver-default-visual 9-41

xserver-disabled-extensions 9-40

xserver-enable-local-dead-key-processing 9-25

xserver-enable-local-lightpen-blue-flood 9-25

xserver-font-alias-file-name 9-23

xserver-font-cache-max-size 7-14, 9-23

xserver-font-directory-file-name 9-23

xserver-font-path-alias-table 9-24

xserver-fontserver-open-timeout 7-25, 9-24

xserver-fontserver-read-timeout 7-26, 9-24

xserver-fontserver-reopen-timeout 7-25, 9-24

xserver-fontserver-retry-attempts 7-26, 9-24

xserver-input-extension-device 9-25, 14-13, 15-3, 15-4

xserver-keyboard-description-file 9-24

xserver-keyboard-narrow-keysym-tables 9-24

xserver-keyboard-type 9-24

xserver-keysym-file 2-5, 9-40

xserver-mouse-buttons 9-25

xserver-retain-font-path 9-23

xserver-retain-x-settings 9-40

xserver-rgb-file 2-5, 9-40

Xservers file 8-6, 8-19

xserver-touchscreen-calibration limits 9-25

xserver-white-pixel 9-41

.xsession files 8-6, 8-7

Xsession file 8-6

: displaying the font path 7-17
: modifying current font path 7-12

Xstartup file 8-6

XT messages 18-142

Z

: zk command (Boot Monitor) 11-10
: zs command (Boot Monitor) 11-10

[Top] [Prev] [Next] [Contents] [Index]

Send comments, suggestions, or questions about this document to the NCD Technical Publications Department by Internet e-mail. Write to us at techpubs@ncd.com.

Copyright © 1997, NCD Inc. All rights reserved.