[Top] [Prev] [Next] [Contents] [Index]
UI Messages
UI messages pertain to the X server's user interface. If you are looking for a message that refers to the UI module but that does not appear here, refer to "Messages Common to All Modules".
BADGCFLAGS, routine, invalid GC flags
- Severity:
- Warning
- Explanation:
- The specified routine has attempted to create an X internal
structure with inappropriate properties.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
BADGCMODE, routine, gc must be readonly or writable
- Severity:
- Warning
- Explanation:
- The specified routine has attempted to create an X internal
structure with incorrect protection.
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
BADITEM, routine, invalid item number n
- Severity:
- Warning
- Explanation:
- The specified routine attempted to set an entry to an
unacceptable value (for example, less than zero or greater than the acceptable
maximum).
- User Action:
- If you encounter this message, please contact NCD Technical
Support.
BADTRANSLATION, translation syntax error: translation
- Severity:
- Error
- Explanation:
- The UI module has encountered an error in the specified
resource translation string.
- User Action:
- Make sure the terminal's resource translations use the correct
names, format, and syntax.
INITCONN, unable to initialize connection to display
- Severity:
- Fatal
- Explanation:
- The UI module created but could not initialize the requested
connection to the display.
- User Action:
- Verify that the terminal has sufficient memory. If the memory
level is adequate and you encounter this message frequently, please contact
NCD Technical Support.
NOCONN, unable to connect to display "display"
- Severity:
- Fatal
- Explanation:
- The UI module cannot connect to the specified display.
- User Action:
- Verify that the requested display name is correct. Verify that the
specified display is running, and that it is accessible via the network.
XERROR, description error from request code nn.nn on value hex_value
- Severity:
- Error
- Explanation:
- This message indicates there is an error in the MIT X server.
- User Action:
- Refer to Xlib documentation for information about the specified
error.
[Top] [Prev] [Next] [Contents] [Index]
Send comments, suggestions, or questions about this document to the NCD Technical Publications Department by Internet e-mail. Write to us at
techpubs@ncd.com.
Copyright © 1997, NCD Inc. All rights
reserved.