[Top] [Prev] [Next] [Contents] [Index]
WIRELESS Messages
WIRELESS messages pertain to the wireless LAN adapter. For messages that refer to WIRELESS, but do not appear here, see "Messages Common to All Modules".
ACCESS, access point error
- Severity:
- Error
- Explanation:
- The software detected an error reported by the Access Point.
Usually the LAN adapter is restarted in an attempt to recover from this error.
- User Action:
- Make sure that the terminal and Access Point are properly
configured and that there are enough Access Points to provide adequate
coverage of the area. If the problem persists, please contact your service
personnel or NCD Technical Support.
ANTCHG, antenna status change
- Severity:
- Information
- Explanation:
- Displayed on a terminal with a RangeLAN 7200 LAN adapter
installed when the terminal detects a change in the antenna status.
- User Action:
- Make sure the antenna is securely attached to the LAN adapter
card. If the message persists, please contact your service personnel or NCD
Technical Support.
ANTCON, antenna connected
- Severity:
- Information
- Explanation:
- Displayed on a terminal with a RangeLAN 7200 LAN adapter
installed when the antenna is reconnected.
- User Action:
- None.
ANTDIS, antenna disconnected
- Severity:
- Information
- Explanation:
- Displayed on a terminal with a RangeLAN 7200 LAN adapter
installed when the terminal detects that the antenna is disconnected.
- User Action:
- Make sure that the antenna is securely attached to the LAN
adapter card. If the message persists, please contact your service personnel or
NCD Technical Support.
IBUFFER, internal buffer error: reason_code
- Severity:
- Error
- Explanation:
- The software detected an internal buffer error. Usually the LAN
adapter is restarted in an attempt to recover from this error.
- User Action:
- If this problem persists, please contact NCD Technical Support.
IMBUF, mbuf error: reason_code
- Severity:
- Error
- Explanation:
- The software detected a communication buffer error. Usually
the LAN adapter is restarted in an attempt to recover from this error.
- User Action:
- If this problem persists, please contact NCD Technical Support.
INACTIVITY, wireless inactivity time out
- Severity:
- Information
- Explanation:
- The LAN adapter has issued an inactivity time out.
- User Action:
- None; the terminal software ignores this message.
INITFAIL, initialization failure: reason_code
- Severity:
- Fatal
- Explanation:
- The terminal failed to initialize the LAN adapter card.
- User Action:
- Try the following remedies, in the order given:
- Make sure the LAN adapter card is fully inserted in the slot and the antenna is properly connected.
- Make sure the terminal is properly configured for wireless use.
- Make sure the Access Point is properly configured.
- Test the wireless system to make sure the terminal is within the range of an Access Point.
If you cannot find the source of the problem, please call your service personnel or NCD Technical Support.
INSTACK, internal stack error: reason_code
- Severity:
- Warning
- Explanation:
- The software detected an internal stack error. Usually, the
adapter is restarted in an attempt to overcome this error.
- User Action:
- If the problem persists, please contact NCD Technical Support.
INTERRUPT, unexpected interrupt
- Severity:
- Warning
- Explanation:
- The terminal received an unexpected interrupt from the LAN
adapter card.
- User Action:
- None; the terminal software ignores this command. If the
message persists, please contact your service personnel or NCD Technical
Support.
INVALID, invalid command command_ID
- Severity:
- Warning
- Explanation:
- The terminal received an invalid command from the LAN
adapter card.
- User Action:
- None; the terminal software ignores this command. If the
message persists, please contact your service personnel or NCD Technical
Support.
ISTATUS, internal status error: reason_code
- Severity:
- Warning
- Explanation:
- The software detected an internal stack error. Usually, the
adapter is restarted in an attempt to overcome this error.
- User Action:
- If the problem persists, please contact NCD Technical Support.
RECEIVE, receive error: reason_code
- Severity:
- Error
- Explanation:
- The software detected a receive status error. Usually, the LAN
adapter is restarted in an attempt to recover from this error. This problem may
be caused by intermittent communication between the terminal and the
Access Point and may indicate that there are not enough Access Points to
provide adequate coverage of the area.
- User Action:
- If this problem persists, please contact NCD Technical Support.
RESFAIL, reset failure: reason_code
- Severity:
- Fatal
- Explanation:
- The terminal failed to reset the LAN adapter card.
- User Action:
- None, but if the message persists, please contact your service
personnel or NCD Technical Support.
RESTARTED, wireless adapter restarted
- Severity:
- Information
- Explanation:
- The wireless adapter has restarted. This usually occurs when
the adapter is recovering from a communication error.
- User Action:
- Make sure the LAN adapter card is fully inserted in the slot and
the antenna is properly connected. If the problem persists, please contact your
service personnel or NCD Technical Support.
RTIMEOUT, receive timeout error: reason_code
- Severity:
- Error
- Explanation:
- The software timed out on receipt of a packet. Usually, the LAN
adapter is restarted in an attempt to recover from this error. This problem may
be caused by intermittent communication between the terminal and the
Access Point and may indicate that there are not enough Access Points to
provide adequate coverage of the area.
- User Action:
- If this problem persists, please contact NCD Technical Support.
TOFAIL, timeout waiting for interrupt
- Severity:
- Fatal
- Explanation:
- The terminal timed out waiting for an interrupt.
- User Action:
- Try the following remedies in the order given:
- Make sure the LAN adapter card is fully inserted in the slot and the antenna is properly connected.
- Make sure the terminal is properly configured for wireless use.
- Make sure the Access Point is properly configured.
- Test the wireless system to make sure the terminal is within the range of an Access Point.
If you cannot find the source of the problem, please contact your service personnel or NCD Technical Support.
TRANSMIT, transmit error
- Severity:
- Fatal
- Explanation:
- The terminal detected a transmit error to the Access Point.
- User Action:
- Try the following remedies in the order given:
- Make sure the LAN adapter card is fully inserted in the slot and the antenna is properly connected.
- Make sure the terminal is properly configured for wireless use.
- Make sure the Access Point is properly configured.
- Test the wireless system to make sure the terminal is within the range of an Access Point.
If you cannot find the source of the problem, please contact your service personnel or NCD Technical Support.
TTIMEOUT, transmit timeout error: reason_code
- Severity:
- Error
- Explanation:
- The software timed out on transmit of a packet. Usually, the
LAN adapter is restarted in an attempt to recover from this error. This
problem may be caused by intermittent communication between the terminal
and the Access Point and may indicate that there are not enough Access
Points to provide adequate coverage of the area.
- User Action:
- If this problem persists, please contact NCD Technical Support.
[Top] [Prev] [Next] [Contents] [Index]
Send comments, suggestions, or questions about this document to the NCD Technical Publications Department by Internet e-mail. Write to us at
techpubs@ncd.com.
Copyright © 1997, NCD Inc. All rights
reserved.