This document applies to all levels of AIX.
New Pinouts: 8-Wire RJ-45 DB-9 DSR 1<---------------6 DTR /---RTS 2 | FG 3 | TxD 4--------------->3 RxD | RxD 5<---------------2 TxD | SG 6----------------5 SG \-->CTS 7 DTR 8--------------->4 DSRThese pinouts should work with both XON/XOFF and DTR flow control. When using DTR flow control, use the 'alternate rj45 pinout' setting for the printer device. (Altpin does logical switch DSR->DCD)
New Pinouts: 10-Wire RJ-45 DB-9 /---RTS 2 | FG 3 | TxD 4---------------->3 RxD | RxD 5<----------------2 TxD | SG 6-----------------5 SG \-->CTS 7 DTR 8---------------->4 DSR DCD 10<---------------6 DTRThese pinouts should work with both XON/XOFF and DTR flow control. There is no need for the 'alternate rj45 pinout' setting here. DCD (printer) is already going to DCD (RISC).
New Pinouts: 8-Wire RJ-45 DB-9 /----2 RTS | 3 RD----------->TD 2 | 4 DCD<----------DTR 6 | 5 SG------------SG 5 | 6 TD<-----------RD 3 | 7 DTR---------->DSR 4 \--->8 CTSThese pinouts should work with both XON/XOFF and DTR flow control. There is no setting for the 'alternate RJ45 pinout' setting because there is no need for it. DTR (printer) is already going to DCD (RISC).
[ Doc Ref: 91884999814958 Publish Date: Mar. 29, 2001 4FAX Ref: 6433 ]