Detail Setup pcmcia Modem Cards


Contents

About this document
The README file
The attr.NEW.IBM file
The attr.NEW.MHz file
The modem28 file

About this document

The following files are included in this document and should be separated:

  1. README
  2. attr.NEW.IBM
  3. attr.NEW.MHz
  4. modem28
IMPORTANT NOTE: Make a copy of the following Object Data Manager(ODM) database files before running the scripts:
/etc/objrepos/PdAt 
/etc/objrepos/PdCn 
/etc/objrepos/PdDv 

The README file

##################################################### 
 The "modem 28" script configures IBM or MegaHertz PCMCIA 
 cards. It installs and configures the necessary 
 drivers and creates an entry in ODM. 
 Date Written 3-13-96 
 IBM PC Company HelpCenter 
 3039 Cornwallis Road 
 RTP, NC 27709 
##################################################### 
To be able to run this script:
  1. Make sure that you have an AIX Version 4.1.4 CD-ROM.
  2. Your operating system must be at 4.1.4.
  3. You have root privileges on the machine.
  4. Create a modem directory in your /tmp file system.
       mkdir -p /tmp/modem 
    
  5. Make sure that you have three files in this directory. That is, in /tmp/modem you should have the following files:
    • attr.NEW.IBM
    • attr.NEW.MHz
    • modem28

  6. Ensure that the modem28 file has execute permission. Enter:
       chmod 744 modem28 
    

The attr.NEW.IBM file

PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "bus_io_addr" 
deflt = "0x3f8" 
values = "0x2f8,0x3f8,0x2e8,0x3e8" 
width = "0x08" 
type = "O" 
generic = "D" 
rep = "nl" 
nls_index = 3 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "modem_type" 
deflt = "1" 
values = "1" 
width = "" 
type = "R" 
generic = "" 
rep = "nl" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "bus_intr_lvl" 
deflt = "9" 
values = "5,7,9,11" 
width = "" 
type = "I" 
generic = "D" 
rep = "nl" 
nls_index = 5 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "intr_priority" 
deflt = "2" 
values = "1,2" 
width = "" 
type = "P" 
generic = "D" 
rep = "nl" 
nls_index = 6 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "frequency" 
deflt = "115200" 
values = "115200" 
width = "" 
type = "R" 
generic = "" 
rep = "nl" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "driver" 
deflt = "pcrsdd" 
values = "pcrsdd" 
width = "" 
type = "R" 
generic = "" 
rep = "sl" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "pcmcia_devid" 
deflt = "2002,0xa4003900" 
values = "" 
width = "" 
type = "R" 
generic = "" 
rep = "s" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "pm_dev_att" 
deflt = "0x00600000" 
values = "0x00600000" 
width = "" 
type = "R" 
generic = "" 
rep = "n" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "pm_dev_itime" 
deflt = "0" 
values = "0" 
width = "" 
type = "R" 
generic = "" 
rep = "n" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "pm_dev_stime" 
deflt = "0" 
values = "0" 
width = "" 
type = "R" 
generic = "" 
rep = "n" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "load_module" 
deflt = "/usr/lib/methods/isaload" 
values = "/usr/lib/methods/isaload" 
width = "" 
type = "E" 
generic = "" 
rep = "sl" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "rtrig" 
deflt = "3" 
values = "0-3,1" 
width = "" 
type = "E" 
generic = "DU" 
rep = "nr" 
nls_index = 11 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "tbc16" 
deflt = "16" 
values = "1-16,1" 
width = "" 
type = "E" 
generic = "DU" 
rep = "nr" 
nls_index = 10 
PdAt: 
uniquetype = "adapter/pcmcia/a4003900" 
attribute = "speed" 
deflt = "9600" 
values = "0,50,75,110,134,150,200,300,600,1200,1800,2400,4800,9600,19200,38400" 
width = "" 
type = "E" 
generic = "DU" 
rep = "slm" 
nls_index = 12 
PdCn: 
uniquetype = "adapter/pcmcia/a4003900" 
connkey = "rs232" 
connwhere = "s" 
PdDv: 
type = "a4003900" 
class = "adapter" 
subclass = "pcmcia" 
prefix = "sa" 
devid = "" 
base = 0 
has_vpd = 0 
detectable = 1 
chgstatus = 0 
bus_ext = 0 
fru = 2 
led = 2086 
setno = 151 
msgno = 2 
catalog = "devices.cat" 
DvDr = "pcmcia/pcrsdd" 
Define = "/usr/lib/methods/define_rspc" 
Configure = "/usr/lib/methods/cfgpcasync" 
Change = "/usr/lib/methods/chggen_rspc" 
Unconfigure = "/usr/lib/methods/ucfgpcasync" 
Undefine = "/usr/lib/methods/undefine" 
Start = "" 
Stop = "" 
inventory_only = 0 
uniquetype = "adapter/pcmcia/a4003900" 

The attr.NEW.MHz file

PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "bus_io_addr" 
deflt = "0x3f8" 
values = "0x2f8,0x3f8,0x2e8,0x3e8" 
width = "0x08" 
type = "O" 
generic = "D" 
rep = "nl" 
nls_index = 3 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "modem_type" 
deflt = "1" 
values = "1" 
width = "" 
type = "R" 
generic = "" 
rep = "nl" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "bus_intr_lvl" 
deflt = "9" 
values = "5,7,9,11" 
width = "" 
type = "I" 
generic = "D" 
rep = "nl" 
nls_index = 5 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "intr_priority" 
deflt = "2" 
values = "1,2" 
width = "" 
type = "P" 
generic = "D" 
rep = "nl" 
nls_index = 6 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "frequency" 
deflt = "115200" 
values = "115200" 
width = "" 
type = "R" 
generic = "" 
rep = "nl" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "driver" 
deflt = "pcrsdd" 
values = "pcrsdd" 
width = "" 
type = "R" 
generic = "" 
rep = "sl" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "pcmcia_devid" 
deflt = "2002,0x02010000" 
values = "" 
width = "" 
type = "R" 
generic = "" 
rep = "s" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "pm_dev_att" 
deflt = "0x00600000" 
values = "0x00600000" 
width = "" 
type = "R" 
generic = "" 
rep = "n" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "pm_dev_itime" 
deflt = "0" 
values = "0" 
width = "" 
type = "R" 
generic = "" 
rep = "n" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "pm_dev_stime" 
deflt = "0" 
values = "0" 
width = "" 
type = "R" 
generic = "" 
rep = "n" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "load_module" 
deflt = "/usr/lib/methods/isaload" 
values = "/usr/lib/methods/isaload" 
width = "" 
type = "E" 
generic = "" 
rep = "sl" 
nls_index = 0 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "rtrig" 
deflt = "3" 
values = "0-3,1" 
width = "" 
type = "E" 
generic = "DU" 
rep = "nr" 
nls_index = 11 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "tbc16" 
deflt = "16" 
values = "1-16,1" 
width = "" 
type = "E" 
generic = "DU" 
rep = "nr" 
nls_index = 10 
PdAt: 
uniquetype = "adapter/pcmcia/02010000" 
attribute = "speed" 
deflt = "9600" 
values = "0,50,75,110,134,150,200,300,600,1200,1800,2400,4800,9600,19200,38400" 
width = "" 
type = "E" 
generic = "DU" 
rep = "slm" 
nls_index = 12 
PdCn: 
uniquetype = "adapter/pcmcia/02010000" 
connkey = "rs232" 
connwhere = "s" 
PdDv: 
type = "02010000" 
class = "adapter" 
subclass = "pcmcia" 
prefix = "sa" 
devid = "" 
base = 0 
has_vpd = 0 
detectable = 1 
chgstatus = 0 
bus_ext = 0 
fru = 2 
led = 2086 
setno = 151 
msgno = 2 
catalog = "devices.cat" 
DvDr = "pcmcia/pcrsdd" 
Define = "/usr/lib/methods/define_rspc" 
Configure = "/usr/lib/methods/cfgpcasync" 
Change = "/usr/lib/methods/chggen_rspc" 
Unconfigure = "/usr/lib/methods/ucfgpcasync" 
Undefine = "/usr/lib/methods/undefine" 
Start = "" 
Stop = "" 
inventory_only = 0 
uniquetype = "adapter/pcmcia/02010000" 

The modem28 file

#!/usr/bin/ksh 
# ########################################################### 
# This script configures an IBM or MegaHertz PCMCIA card. 
# Also, this script is specific to ONLY 28.8 Data/Fax cards. 
# The reason for this is that each PCMCIA card is hardwired with 
# a unique manufacturer ID. This script, for the most part, 
# would install (if it is already not installed) the device driver 
# from the AIX 4.1.4 CD. It then attemps to configure the 
# PCMCIA card. 
############################################################# 
############################################################# 
# Requirement to run this script: 
# 1) HAVE AIX 4.1.4 CD-ROM 
# 2) HAVE THE ROOT PRIVILEGES 
# 3) Have either IBM or MegaHertz PC card 
############################################################# 
############################################################# 
# Script courtesy of the PC Company HelpCenter, RTP, NC 
# Script Created: March 13, 1996 
############################################################# 
USER= whoami 
OS= oslevel 
ODMSUCCESSFUL=FALSE 
if [ "$USER" != "root" ] || [ "$OS" != "4.1.4.0" ] 
then 
clear 
echo 'Cannot run this script!!' 
echo "Either you are NOT logged in as root OR" 
echo "You are at an earlier level of AIX then 4.1.4" 
echo "Exiting..." 
exit 1 
fi 
/usr/bin/clear 
function header { 
echo "         ========================================= " 
echo "        |       IBM PC COMPANY HELPCENTER         |" 
echo "        | This script configures an UNSUPPORTED   |" 
echo "        |    IBM PCMCIA 28.8(V.34)/14.4 Kbs       |" 
echo "        |      Data/FAX Modem                     |" 
echo "        |          Part Number: 25H6420           |" 
echo "        |                   OR                    |" 
echo "        |     MegaHertz 28.8/14.4kbps Data/Fax    |" 
echo "        |             on AIX 4.1.4.0              |" 
echo "         ========================================= " 
}; header 
echo "+======================================================+" 
echo "Please use this script with the following understanding:" 
echo "IBM WILL NOT BE RESPONSIBLE FOR DAMAGES OF ANY KIND" 
echo "RESULTING FROM ITS USE. THE USE OF THIS INFORMATION" 
echo "IS THE SOLE RESPONSIBILITY OF THE CUSTOMER AND DEPENDS" 
echo "ON THE CUSTOMER'S ABILITY TO EVALUATE AND INTEGRATE" 
echo "THIS SCRIPT INTO THE CUSTOMER'S OPERATIONAL ENVIRONMENT" 
echo "" 
echo "====================================================" 
echo "This script has been tested with ONLY IBM & Megahertz" 
echo "28.8 PCMCIA cards.  During the test, configuration of" 
echo "The above PC cards were successful.  This, however, doesn't" 
echo "imply any implicit or explicit guarantee that the cards" 
echo "would configure in all the possible environments." 
echo "" 
echo "+====================================================+" 
echo "Continue with modem config./install. (y/n)? read ANSWER 
if [ "$ANSWER" = "y" ] || [ "$ANSWER" = "Y" ] 
then 
echo "" 
echo "1) Make sure that AIX 4.1.4 CDROM is in the Drive." 
echo "2) Make sure that PCMCIA (28.8) Card is in the Slot." 
echo "Press >>>>CONTROL+C<<<< to exit script if the above" 
echo "device and the media" 
echo "is not already in the machine." 
fi 
if [ "$ANSWER" = "y" ] || [ "$ANSWER" = "Y" ] 
then 
# the following two lines should read as one 
if [ ! -f /tmp/modem/attr.NEW.IBM ] || [ 
! -f /tmp/modem/attr.NEW.MHz ] 
then 
echo "Error in finding script library files." 
echo "Exiting script without any configuration." 
exit 1 
fi 
echo "Enter What Modem Type You are using," 
echo "IBM or MHz.(ibm/mhz) Modem Type? read MODEMTYPE 
# the following two lines should appear on one line. 
if [ "$MODEMTYPE" != "ibm" ] && [ "$MODEMTYPE" 
!= "mhz" ] 
then 
echo "Error. Incorrect Modem Type Entered." 
echo "Exiting..." 
exit 1 
else 
echo "" 
echo "MAKE SURE THAT THE " 
echo "1) MODEM IS IN THE PCMCIA SLOT." 
echo "2) MODEM IS INSERTED PROPERLY." 
echo 'PRESS >>>control+C<<< if the card is NOT already' 
echo "in the slot and then Re-Run this script." 
echo "Sleeping for 7 seconds..." 
sleep 7 
fi 
fi 
if [ "$ANSWER" = "y" ] || [ "$ANSWER" = "Y" ] 
then 
clear 
header 
echo "" 
echo "====================================" 
echo "Check, Verify Device Driver Routine." 
echo "====================================" 
if [ -d /usr/lpp/devices.pcmcia.a4001d00 ] 
then 
echo "You already have the Needed Modem Driver Installed." 
echo "Now all we have to do is to configure it." 
echo "Sleeping for 10 seconds..." 
sleep 10 
else 
echo "Modem Device Driver NOT installed." 
echo "Ensure that AIX 4.1.4 CDROM is in the CDROM Drive." 
echo "Waiting for 10 seconds..." 
sleep 10 
echo "Driver Installation Initiated." 
/usr/lib/instl/sm_inst installp_cmd -T iems -L -q -a -d 
# the following two lines should read as one. 
'/dev/cd0' -o '4.1.3.0 devices.pcmcia.a4001d00 
ALL @@devices.pcmcia.a40 01d00' '-c' '-N' '-g' '-X'  '-G' 
sleep 10 
if [ $? = 0 ] 
then 
echo "Installation Complete and Successful.." 
echo  "Sleeping for 10 secs..." 
sleep 10 
else 
echo "Installation Encountered a Problem.." 
echo "Sleeping for 5 seconds..." 
sleep 5 
echo "Aborting..." 
exit 1 
fi 
fi 
echo "" 
clear 
header 
echo "" 
echo "====================================" 
echo " RETRIEVE Device Attribute Routine. " 
echo "====================================" 
echo "" 
echo "Next, device attribute for a4002900 will be RETRIEVED." 
echo "" 
echo "Saving Original Device Attributes to /tmp/attrs.ORIG" 
echo "" 
/usr/bin/odmget -q "uniquetype=adapter/pcmcia/a4001d00" PdAt > /tmp/attrs.ORIG 
/usr/bin/odmget -q "uniquetype=adapter/pcmcia/a4001d00" PdCn >> /tmp/attrs.ORIG 
/usr/bin/odmget -q "uniquetype=adapter/pcmcia/a4001d00" PdDv >> /tmp/attrs.ORIG 
DATA=`/usr/bin/du -a /tmp/attrs.ORIG | awk '{print $1}'` 
if [ "$DATA" = 0 ] 
then 
echo "There were no attributes defined in the" 
echo "ODM for the device." 
else 
echo "There were no attributes defined in the" 
echo "ODM for the device." 
fi 
echo "The value of ODM DATA is $DATA " 
echo "Retrieval Done..." 
echo "Sleeping for 10 seconds." 
sleep 10 
clear 
header 
echo "" 
echo "====================================" 
echo "  DELETE Device Attribute Routine.  " 
echo "====================================" 
echo "" 
echo "Next, device attribute for a4002900 will be DELETED 
from ODM." 
echo "" 
/usr/bin/odmdelete -q "uniquetype=adapter/pcmcia/a4001d00" -o PdAt 
/usr/bin/odmdelete -q "uniquetype=adapter/pcmcia/a4001d00" -o PdAt 
/usr/bin/odmdelete -q "uniquetype=adapter/pcmcia/a4001d00" -o PdAt 
echo "" 
echo "Done deleting all the attributes from the ODM database." 
echo "Sleeping for 10 seconds..." 
sleep 10 
clear 
header 
echo "" 
echo "====================================" 
echo " ReGenerate Device Attribute in ODM " 
echo "====================================" 
echo "Earlier you had selected your MODEM TYPE to be: $MODEMTYPE" 
echo "Now Creating an ODM entry for $MODEMTYPE modem." 
if [ "$MODEMTYPE" = "ibm" ] 
then 
/usr/bin/odmadd /tmp/modem/attr.NEW.IBM 
if [ $? = 0 ] 
then 
echo "ODM Entry Successful." 
ODMSUCCESSFUL=TRUE 
sleep 6 
else 
echo "Error in Creating Entry in ODM." 
echo "Critical Error." 
if [ "$DATA" != 0 ] 
then 
echo "Now restoring back the original odm information.." 
echo "Please wait..." 
sleep 7 
/usr/bin/odmadd /tmp/attrs.ORIG 
if [ $? = 0 ] 
then 
rm -f /tmp/attrs.ORIG 
fi 
sleep 
fi 
echo "Aboring script" 
exit 1 
fi 
fi 
if [ "$MODEMTYPE" = "mhz" ] 
then 
/usr/bin/odmadd /tmp/modem/attr.NEW.MHz 
if [ $? = 0 ] 
then 
echo "Entry Successful." 
ODMSUCCESSFUL=TRUE 
sleep 6 
else 
echo "Error in Creating Entry in ODM." 
echo "Critical Error." 
echo "Aborting script" 
exit 1 
fi 
fi 
echo "" 
if [ "$ODMSUCCESSFUL" = "TRUE" ] 
then 
echo "Since the ODM entry was successful..the script" 
echo "will now attempt to see if the Operating System Will" 
echo "recognize the PCMCIA card.." 
/usr/sbin/cfgmgr 
if [ $? = 0 ] 
then 
CARD=`lscfg|grep -i modem| awk '{print $4,$5,$6,$7,$8}'` 
echo "" 
echo "============================================" 
echo '           Congratulations!!!!              ' 
echo "" 
echo "Looks like the configuration was successful." 
echo "" 
echo "Card: $CARD." 
echo "============================================" 
sleep 5 
else 
echo "AIX, for some odd reason was not able to recognize" 
echo "you PCMCIA Card." 
fi 
fi 
echo "All done..." 
echo "Modem driver has been Installed and Configured." 
echo "" 
echo "NOTES:" 
echo "During the initialization and configuration of your modem," 
echo "some device attributes files were saved to the temporary" 
echo "directory. In most cases you will NOT need these files," 
echo "unless you know that you have a specific/known reason to" 
echo "save them." 
echo "Do you want to DELETE these files? (y/n)read ANSWER2 
if [ "$ANSWER2" = "y" ] || [ "$ANSWER2" = "Y" [ 
then 
echo "Deleting Original Configuration files." 
/usr/bin/rm -f /tmp/attrs.ORIG 
echo "Deleted files." 
echo "ALL DONE." 
fi 
else 
echo "You selected NOT to run this configuration for the answer..." 
echo "Script Aborting...." 
fi 
# *********************** END OF SCRIPT *********************** 




[ Doc Ref: 90605218714814     Publish Date: Feb. 14, 2001     4FAX Ref: 5735 ]