Filename: SE165089.EXE
For: WinFrame Version 1.6
Replaces: WF160506, SE165080
Language supported: English (US)

NOTE: You must install Service Pack 5 before applying this Hotfix.


Description
-----------
This hotfix for Citrix WinFrame Version 1.6 addresses the
following issues:

1. This corrects the problem where print jobs would get stuck in
   the spooler when printed to a permanent client WinStation
   printer. The spooler status would say "printing" but it would
   not print unless you restarted the spooler.
   [From Hotfix WF160506]

2. This hotfix solves the "All Pipe Instances are Busy" error.
   This error is caused by applications that use the 16-bit DOS
   method of printing using pipes.  The default number of
   available pipes is ten. Under heavy printing conditions, the
   default value may not suffice.
   [From Hotfix SE165080 and SE165089]


Installation Instructions for the SE165089 Hotfix
-------------------------------------------------
1. Copy SE165089.EXE to an empty directory on your hard disk and execute
   the command:

   SE165089

2. Execute the following command to install the Hotfix on your system:

   HOTFIX /I

3. Shut down and restart your computer.


Notes
-----
The CLTPRINT.EXE utility allows the number of Client Printer
Pipe Instances to be increased.  The CLTPRINT utility has the
following usage:

CLTPRINT - Change the number of Client Printer Pipes Instances
      [/Q]            - query current setting
      [/PIPES:number] - Set the number of Client Printer Pipe
                        Instances (10-63)
      [/?]            - display this help message

Once CLTPRINT is used to increase the number of pipe instances,
the spooler must be stopped and then restarted in Control
Panel/Services. The spooler will be restarted with the number
of Client Printer Pipes Instances set to the new value.  The
value for the number of Client Printer Pipe Instances is saved
in the following Registry entry:

HKEY_LOCAL_MACHINE\SYSTEM
  \CurrentControlSet
    \Control
      \Print
       \Monitors
        \Client Printer Port
          \Parameters

VALUE: NumClientPrinterPipes: REG_DWORD

This entry will not exist on systems that have not run
"cltprint" and will use the default of ten pipe instances.
This entry is ignored on systems that do not have the
updated "cpmmon.dll".

For most users, the default number of ten pipe instances should
be sufficient.